PNEUFIT 10 series Push-in fittings

> Port size: Ø 4 ... 16 mm O/D tube, ISO G, ISO R, ISO Rc and NPT threads > Very compact units > Easy tube insertion for rapid assembly of pneumatic circuits > Positive tube anchorage > All BSP taper threads pre-coated with non- PTFE based sealant > Straight adaptors feature internal

Wi-Fi 6E Dual-Radio Indoor Access Point With Integrated or External Antenna Options

The AP3000/X Wi-Fi 6E access point, with two 2x2:2 radios, provides high- efficiency, high-performance 802.11ax aggregate data rates up to 4.8 Gbps in the 6 GHz, 5 GHz, and 2.4 GHz bands. Designed for dense and/or harsh environments, such as classrooms, warehouses, healthcare clinics, and manufact

Wi-Fi 6E Tri-Radio Indoor Access Point with Support for Multiple Extreme Operating Systems

Unlike other access points that scan only part-time, the AP4000 features a dedicated tri-frequency sensor that monitors for rogue devices full time, eliminating the risk of vulnerability and attacks. This tri-radio AP is capable of multiple operating modes, optimizing for maximum performance witho

Wi-Fi 6E Tri-Radio Indoor Access Point with Support for Multiple Extreme Operating Systems

Unlike other access points that scan only part-time, the AP5010 features a dedicated tri-frequency sensor that monitors for rogue devices full time, eliminating the risk of vulnerability and attacks. This tri-radio AP is capable of multiple operating modes, optimizing for maximum performance witho

Nylon PCB Supports - Imperial Spacing

文件：111.86 Kbytes Page：1 Pages

Low Power Dual Parity Checker/Generator

General Description The 100360 is a dual parity checker/generator. Each half has nine inputs; the output is HIGH when an even number of inputs are HIGH. One of the nine inputs (Ia or Ib) has the shorter through-put delay and is therefore preferred as the expansion input for generating parity for

Inductive Sensor

Features ■Threaded barrel, M8 x 1 ■Stainless steel, 1.4427 SO ■DC 2-wire, nom. 8.2 VDC ■Output acc. to DIN EN 60947-5-6 (NAMUR) ■Cable connection ■ATEX category II 1 G, Ex zone 0 ■ATEX category II 1 D, Ex zone 20 ■SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 with HFT

Inductive Sensor

Features ■Threaded barrel, M8 x 1 ■Stainless steel, 1.4427 SO ■DC 2-wire, nom. 8.2 VDC ■Output acc. to DIN EN 60947-5-6 (NAMUR) ■Cable connection ■ATEX category II 1 G, Ex zone 0 ■ATEX category II 1 D, Ex zone 20 ■SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 with HFT

Low Power Dual Parity Checker/Generator

General Description The 100360 is a dual parity checker/generator. Each half has nine inputs; the output is HIGH when an even number of inputs are HIGH. One of the nine inputs (Ia or Ib) has the shorter through-put delay and is therefore preferred as the expansion input for generating parity for

Low Power Dual Parity Checker/Generator

General Description The 100360 is a dual parity checker/generator. Each half has nine inputs; the output is HIGH when an even number of inputs are HIGH. One of the nine inputs (Ia or Ib) has the shorter through-put delay and is therefore preferred as the expansion input for generating parity for

Low Power Dual Parity Checker/Generator

General Description The 100360 is a dual parity checker/generator. Each half has nine inputs; the output is HIGH when an even number of inputs are HIGH. One of the nine inputs (Ia or Ib) has the shorter through-put delay and is therefore preferred as the expansion input for generating parity for

Inductive Sensor

Features ■Threaded barrel, M8 x 1 ■Stainless steel, 1.4427 SO ■DC 2-wire, nom. 8.2 VDC ■Output acc. to DIN EN 60947-5-6 (NAMUR) ■M12 x 1 male connector ■ATEX category II 1 G, Ex zone 0 ■ATEX category II 1 D, Ex zone 20 ■SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 wi

Low Power Dual 8-Input Multiplexer

General Description The 100363 is a dual 8-input multiplexer. The Data Select (Sn) inputs determine which bit (An and Bn) will be presented at the outputs (Za and Zb respectively). The same bit (0–7) will be selected for both the Za and Zb output. All inputs have 50 kΩ pull-down resistors. Featu

Low Power Dual 8-Input Multiplexer

General Description The 100363 is a dual 8-input multiplexer. The Data Select (Sn) inputs determine which bit (An and Bn) will be presented at the outputs (Za and Zb respectively). The same bit (0–7) will be selected for both the Za and Zb output. All inputs have 50 kΩ pull-down resistors. Featu

Low Power Dual 8-Input Multiplexer

General Description The 100363 is a dual 8-input multiplexer. The Data Select (Sn) inputs determine which bit (An and Bn) will be presented at the outputs (Za and Zb respectively). The same bit (0–7) will be selected for both the Za and Zb output. All inputs have 50 kΩ pull-down resistors. Featu

Low Power Dual 8-Input Multiplexer

General Description The 100363 is a dual 8-input multiplexer. The Data Select (Sn) inputs determine which bit (An and Bn) will be presented at the outputs (Za and Zb respectively). The same bit (0–7) will be selected for both the Za and Zb output. All inputs have 50 kΩ pull-down resistors. Featu

Low Power 16-Input Multiplexer

General Description The 100364 is a 16-input multiplexer. Data paths are controlled by four Select lines (S0–S3). Their decoding is shown in the Truth Table. Output data polarity is the same as the selected input data. All inputs have 50 kΩ pull-down resistors. Features ■ 35 power reduction of

Inductive Sensor

Features ■Threaded barrel, M8 x 1 ■Stainless steel, 1.4427 SO ■DC 2-wire, nom. 8.2 VDC ■Output acc. to DIN EN 60947-5-6 (NAMUR) ■M12 x 1 male connector ■ATEX category II 1 G, Ex zone 0 ■ATEX category II 1 D, Ex zone 20 ■SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 wi

Low Power 16-Input Multiplexer

General Description The 100364 is a 16-input multiplexer. Data paths are controlled by four Select lines (S0–S3). Their decoding is shown in the Truth Table. Output data polarity is the same as the selected input data. All inputs have 50 kΩ pull-down resistors. Features ■ 35 power reduction of

Low Power 16-Input Multiplexer

General Description The 100364 is a 16-input multiplexer. Data paths are controlled by four Select lines (S0–S3). Their decoding is shown in the Truth Table. Output data polarity is the same as the selected input data. All inputs have 50 kΩ pull-down resistors. Features ■ 35 power reduction of

Low Power 16-Input Multiplexer

General Description The 100364 is a 16-input multiplexer. Data paths are controlled by four Select lines (S0–S3). Their decoding is shown in the Truth Table. Output data polarity is the same as the selected input data. All inputs have 50 kΩ pull-down resistors. Features ■ 35 power reduction of

External Balanced LTE/Cellular Antenna

APPLICATIONS •Medical applications •Home automation •Smart metering •M2M,Industrial devices •IoT •M2M •Automotive •Healthcare •PointofSale •Tracking •NB-IoT •Sigfox •LoRa •Cellular LPWA •RPMA •LTECAT-M

5 GHz Single Band Stamped Metal Embedded Antenna

APPLICATIONS • Embedded design • Cellular,Headsets,Tablets • Gateway,Access Point • Handheld • Telematics • Tracking • Healthcare • M2M , Industrialdevices • Smart Grid • OBD-II

Wi-Fi/BT Dual Band or V2X Stamped Metal Embedded Antenna

APPLICATIONS •Embedded design •Cellular, Headsets, Tablets •Gateway, Access Point •Handheld •Telematics •Tracking •Healthcare •M2M,Industrial devices •SmartGrid •V2X •OBD-II

CF CRIMPHANDY 1,5 SET - Tool set

Product description Set consists of: Crimphandy 1.5 mm2, incl. battery, charger, CUTFOX 12 cable cutter, waste guide plate 2x, service tool for troubleshooting, and a 1.5 mm2 ferrule strip, packed in a robust case. A CRIMPHANDY CUTTER, 1.5 mm2 taped ferrules, 100 strips, each with 50 ferrules pe

CF CRIMPHANDY 1,0 SET - Tool set

Product description Set consists of: Crimphandy 1.0 mm2, including battery, charger, CUTFOX 12 cable cutter, waste guide plate 2x, service tool for troubleshooting, and a 1.0 mm2 ferrule strip, packed in a robust case. A CRIMPHANDY CUTTER, 1.0 mm2 taped ferrules, 100 strips, each with 50 ferrule

CF CRIMPHANDY 0,75 SET - Tool set

Product description Set consists of: Crimphandy 0.75 mm2, including battery, charger, CUTFOX 12 cable cutter, waste guide plate 2x, service tool for troubleshooting, and a 0.75 mm2 ferrule strip, packed in a robust case. A CRIMPHANDY CUTTER, 0.75 mm2 taped ferrules, 0.75 strips, each with 50 fer

CF CRIMPHANDY 0,5 SET - Tool set

Product description Set consists of: Crimphandy 0.5 mm2, including battery, charger, CUTFOX 12 cable cutter, waste guide plate 2x, service tool for troubleshooting, and a 0.5 mm2 ferrule strip, packed in a robust case. A CRIMPHANDY CUTTER, 0.5 mm2 taped ferrules, 100 strips, each with 50 ferrule

EV-GBG3C-1AC32A-7,5M6,0ESBK01 - AC charging cable

CHARX connect comfort, GB/T, AC charging cable, 32 A permanent, 440 V AC, with vehicle charging connector and open cable end, cable: 7.5 m, black, straight, with protective cap, housing: black, gray, PHOENIX CONTACT logo, NOTE: Cable management may be required., GB/T 20234.2-2015, GB/T 18487.1-

Inductive Sensor

Features ■Threaded barrel, M8 x 1 ■Stainless steel, 1.4427 SO ■DC 2-wire, nom. 8.2 VDC ■Output acc. to DIN EN 60947-5-6 (NAMUR) ■Pigtail with male end M8 x 1 ■ATEX category II 1 G, Ex zone 0 ■ATEX category II 1 D, Ex zone 20 ■SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 1384

包装：散装 描述：PCB TERMINAL 连接器，互连器件 线对板

RevPi Core S

文件：688.34 Kbytes Page：3 Pages

Low Power Dual Parity Checker/Generator

Low Power Dual Parity Checker/Generator

包装：托盘 描述：SL-SMT 3.5/11/135F 3.2SN BK BX 连接器，互连器件 针座、插头和插座

We are Dedicated to Achieving Customer Satisfaction Through Continuous Improvement

文件：2.45415 Mbytes Page：164 Pages

RevPi Core S

文件：688.34 Kbytes Page：3 Pages

SF-SL 0,8X4,0-100 S-VDE PL-10 - 螺丝刀

Low Power Dual 8-Input Multiplexer

文件：127.98 Kbytes Page：8 Pages

SAS RECEPTACLE HYBRID TYPE ASSY

文件：222.61 Kbytes Page：2 Pages

SAS RECEPTACLE HYBRID TYPE ASSY

文件：222.61 Kbytes Page：2 Pages

SAS RECEPTACLE HYBRID TYPE ASSY

文件：222.61 Kbytes Page：2 Pages

SAS RECEPTACLE VERTICAL SMT TYPE ASSY

文件：252.68 Kbytes Page：2 Pages

SAS RECEPTACLE VERTICAL SMT TYPE ASSY

文件：252.68 Kbytes Page：2 Pages

SAS RECEPTACLE VERTICAL SMT TYPE ASSY

文件：252.68 Kbytes Page：2 Pages

SAS RECEPTACLE VERTICAL SMT TYPE ASSY

文件：252.68 Kbytes Page：2 Pages

SAS RECEPTACLE VERTICAL SMT TYPE ASSY

文件：252.68 Kbytes Page：2 Pages

SAS RECEPTACLE VERTICAL SMT TYPE ASSY

文件：252.68 Kbytes Page：2 Pages

SAS RECEPTACLE VERTICAL SMT TYPE ASSY

文件：252.68 Kbytes Page：2 Pages

Low Power Dual 8-Input Multiplexer

文件：127.98 Kbytes Page：8 Pages

Low Power Dual 8-Input Multiplexer

文件：127.98 Kbytes Page：8 Pages

Low Power 16-Input Multiplexer

文件：124.71 Kbytes Page：8 Pages

Low Power 16-Input Multiplexer

文件：294.07 Kbytes Page：8 Pages

Low Power 16-Input Multiplexer

文件：158.81 Kbytes Page：7 Pages

Low Power 16-Input Multiplexer

文件：294.07 Kbytes Page：8 Pages

Low Power 16-Input Multiplexer

文件：124.71 Kbytes Page：8 Pages

Low Power 16-Input Multiplexer

文件：124.71 Kbytes Page：8 Pages

SAS RECEPTACLE R/A SMT ASSY

文件：258.32 Kbytes Page：3 Pages

SAS RECEPTACLE R/A SMT ASSY

文件：258.32 Kbytes Page：3 Pages

SAS RECEPTACLE R/A SMT ASSY

文件：258.32 Kbytes Page：3 Pages