Nylon PCB Supports - Imperial Spacing

文件：111.86 Kbytes Page：1 Pages

Indicating insert

文件：64.79 Kbytes Page：1 Pages

包装：散装 描述：26 Pin Ribbon Cable Breakout Boa 连接器，互连器件 接口模块

包装：散装 描述：CONN SPLICE 1 AWG CRIMP 连接器，互连器件 电线接头连接器

EPIC® H-B 6 AD-LB

Description  The smallest housing out of the H-B series.  For inserts with high properties.

Pressure Transmitter – IO-Link with Two Switching Outputs

Features ■Fully welded metal measuring cell ■Pressure range 0…10 bar rel. ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection G1/2 male thread, back sealing and manometer (combi) ■Connector device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000

Pressure Transmitter – IO-Link with Two Switching Outputs

Features ■Fully welded metal measuring cell ■Pressure range 0…10 bar rel. ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection 1/2-14 NPT female thread ■Plug-in device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000 product series operate with

Pressure Transmitter – IO-Link with Two Switching Outputs

Features ■Fully welded metal measuring cell ■Pressure range 0…10 bar rel. ■Pressure peak orifice ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection G1/2 male thread, back sealing and manometer (combi) ■Connector device, M12 × 1 Functional principle The pressure

Pressure Transmitter – IO-Link with Two Switching Outputs

Features ■Fully welded metal measuring cell ■Pressure range 0…10 bar rel. ■Pressure peak orifice ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection 1/2-14 NPT female thread ■Plug-in device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000 prod

Cabinet Guard Internal and External Sensors

The cabinet guard IM18-CCM60-MTI/24VDC uses integrated sensors to monitor temperature, relative humidity and the distance from the control cabinet door. The information can be transferred to higher-level systems via the Ethernet interface, for example. The following interfaces are provided on

Inductive Sensor

Features ■M12 × 1 threaded barrel ■Chrome-plated brass ■DC 2-wire, 10…65 VDC ■NO contact ■Cable with male end Functional principle Inductive sensors detect metal objects contactless and wear-free. For this, they use a high-frequency electromagnetic AC field that interacts with the target

Inductive Sensor – With Weldguard® coating and Silicone sleeving

Features ■Rectangular, height 8 mm ■Active face on top ■Metal, Zamak, nickel-plated ■DC 3-wire, 10…30 VDC ■NO contact, PNP output ■Pigtail with male end M12 x 1 Functional principle Inductive sensors detect metal objects contactless and wear-free. For this, they use a high-frequency elec

HF Read/Write Head – For Bus Line Topology with TBEN-*

Features ■M12 × 1 threaded barrel ■Chrome-plated brass ■Device without end termination ■Device may only be operated in line topology TBEN-S*-2RFID-* or TBENL*-4RFID-* ■Max. 32 nodes per line or connection permitted ■Use a corresponding terminating resistor (see accessories) ■Observe the

HF Read/Write Head

Features ■M12 × 1 threaded barrel ■Chrome-plated brass ■Powered and operated only via connection to BL ident interface module ■M12 × 1 connector, connection only via BL ident extension cable Functional principle The HF read/write devices operating at a frequency of 13.56 MHz form a tran

Temperature Detection – Probe

Features ■Pt 100 probe according to DIN EN 60751 ■Resistant to vibrations and shocks ■Connectable to TS, TTM, IM34, BL20, BL67 ■Max. temperature connector: 120°C ■Connection mode: 4-wire connection ■Process connection: M6 × 1 male thread at probe tip Functional principle Resistance ther

Pressure Transmitter – With Current Output (2-Wire)

Features ■Ceramic measuring cell ■Compact and robust design ■Excellent EMC properties ■Pressure range -1…9 bar rel. ■7…33 VDC ■Analog output 4…20 mA ■Process connection G1/8'' male thread (back sealing) according to DIN EN ISO 1179-2 with FPM profile sealing ring ■Connector device, M12 ×

WLAN BT Zigbee Embedded Stamped Metal Antenna

APPLICATIONS •Embedded design •Cellular, Headsets, Tablets •Gateway, Access Point •Handheld •Telematics •Tracking •Healthcare •M2M,Industrial devices •SmartGrid •OBD-II

Incremental Shaft Encoder Industrial Line

Features ■Clamping flange, Ø 58 mm ■Solid shaft, Ø 10 mm × 20 mm ■Optical measuring principle ■Shaft material: stainless steel ■Protection class IP67 on housing and shaft side ■‐40…+85 °C ■Max. 6000 rpm (continuous operation 3000 rpm) ■5…30 VDC ■Male connector, M12 x 1 , 8-pole ■RS422

excom I/O System PROFIBUS-DP Interface

The GDP-NI gateway serves to connect the excom® system to PROFIBUS-DP networks. Connection to the PROFIBUS-DP is established via optical fibers or copper cables. When using optical fibers for data transmission, an optocoupler pair must be installed between wired and optical PROFIBUS. The gatew

Pressure Sensor – IO-Link with 2 PNP Transistor Switching Outputs

Features ■Compact design ■For pressure and vacuum monitoring ■Rotatable sensor body ■Display rotatable by 360° ■Excellent EMC properties ■2 × PNP outputs, IO-Link ■Pressure range -1…1 bar rel. Functional principle The pressure sensors of the PK product series operate using a silicon me

Pressure Sensor – IO-Link with 2 PNP Transistor Switching Outputs

Features ■Compact design ■For pressure and vacuum monitoring ■Rotatable sensor body ■Display rotatable by 360° ■Excellent EMC properties ■2 × PNP outputs, IO-Link ■Pressure range -1…10 bar rel. Functional principle The pressure sensors of the PK product series operate using a silicon m

Temperature Detection – With Current Output and PNP/NPN Transistor Switching Output

Features ■Miniature design ■Parameterizable via IO-Link ■Analog output 4…20 mA (2-wire) ■Switching output ■Compression fitting process connection ■Bendable probe (min. bending radius: 3x outer diameter; excluding 30-mm probe tip) Functional principle All devices of the miniature transmi

Gateway for BL67 I/O system Interface for EtherCAT

■ 3 decimal rotary coding switches ■ Protection class IP67 ■ LEDs for display of supply voltage, group and bus errors ■ Multiprotocol interface between the BL67 system and the Ethernet protocols Modbus TCP, EtherNet/IP and PROFINET ■ PROFINET supports Fast Startup (FSU) ■ EtherNet/IP suppo

WLAN / BT/Zigbee Stamped Metal Antenna

APPLICATIONS •Embedded design •Cellular, Headsets, Tablets •Gateway, Access Point •Handheld •Telematics •Tracking •Healthcare •M2M,Industrial devices •SmartGrid •OBD-II

Temperature Detection – Insertion Probe

Features ■Insertion probe for the food industry ■To determine the internal temperature during the cooking process ■Temperature resistant up to 300 °C ■Plastic handle, suitable for food contact ■Probe dimensions Ø 4 × 100 mm ■Pt100 sensor, class A, 4-wire connection Functional principle

Pressure Transmitter – IO-Link with Two Switching Outputs

Features ■Fully welded metal measuring cell ■Pressure range 0…250 bar rel. ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection 7/16 UNF (SAE) male thread ■Plug-in device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000 product series operate wi

UHF Tag

Features ■The high-temperature tags must undergo adequate stress tests within the proposed temperature processes before deployment. Otherwise, their durability cannot be guaranteed when exposed to temperatures outside the denoted range. ■EEPROM, memory 40 byte ■TID serial number: 6 byte ■

Incremental Shaft Encoder Industrial Line

Features ■Clamping flange, Ø 58 mm ■Solid shaft, Ø 3/8” x 5/8” ■Optical measuring principle ■Shaft material, stainless steel ■Protection class IP67 on housing and shaft side ■‐40…+85 °C ■Max. 6000 rpm (continuous operation 3000 rpm) ■5…30 VDC ■Male connector, M12 x 1 , 8-pole ■RS422 wi

Incremental Shaft Encoder Industrial Line

Features ■Clamping flange, Ø 58 mm ■Solid shaft, Ø 3/8” x 5/8” ■Optical measuring principle ■Shaft material, stainless steel ■Protection class IP67 on housing and shaft side ■‐40…+85 °C ■Max. 6000 rpm (continuous operation 3000 rpm) ■5…30 VDC ■Male connector, M12 x 1 , 8-pole ■RS422 wi

Actuator and Sensor Cordset – Connection Cable

Features ■M12, Female, Straight, 5-pin, Torque sleeve ■Instrumentation Tray Cable ■Yellow TPE jacket, 5X18 AWG ■Sunlight Resistant ■-40 Cold Bend Rating ■Oil Resistant ■Flame Ratings: UL 1685 FT4, UL1061, CSA FT4 ■Flexlife® and C-Track Approved

Actuator and Sensor Cordset – Connection Cable

Features ■M12, Female, Right angle, 5-pin, Torque sleeve ■Instrumentation Tray Cable ■Yellow TPE jacket, 5X18 AWG ■Sunlight Resistant ■-40 Cold Bend Rating ■Oil Resistant ■Flame Ratings: UL 1685 FT4, UL1061, CSA FT4 ■Flexlife® and C-Track Approved

Actuator and Sensor Cordset – Connection Cable

Features ■M12, Female, Right angle, 5-pin, Torque sleeve ■Instrumentation Tray Cable ■Yellow TPE jacket, 5X18 AWG ■Sunlight Resistant ■-40 Cold Bend Rating ■Oil Resistant ■Flame Ratings: UL 1685 FT4, UL1061, CSA FT4 ■Flexlife® and C-Track Approved

Pressure Transmitter – With Voltage Output (3-Wire)

Features ■Ceramic measuring cell ■Compact and robust design ■Excellent EMC properties ■Pressure range 0…1.0 bar abs. ■8…33 VDC ■Analog output 1…6 V ■Process connection 1/4-18 NPT male thread ■Plug-in device, M12 × 1 Functional principle The pressure sensors in the PT…‐1000 product se

Actuator and Sensor Cordset – Connection Cable

Features ■M12, Female, Right angle, 5-pin, Torque sleeve ■Instrumentation Tray Cable ■Yellow TPE jacket, 5X18 AWG ■Sunlight Resistant ■-40 Cold Bend Rating ■Oil Resistant ■Flame Ratings: UL 1685 FT4, UL1061, CSA FT4 ■Flexlife® and C-Track Approved

Actuator and Sensor Cordset – Connection Cable

Features ■M12, Female, Right angle, 5-pin, Torque sleeve ■Instrumentation Tray Cable ■Yellow TPE jacket, 5X18 AWG ■Sunlight Resistant ■-40 Cold Bend Rating ■Oil Resistant ■Flame Ratings: UL 1685 FT4, UL1061, CSA FT4 ■Flexlife® and C-Track Approved

Temperature Detection – With Current Output and PNP/NPN Transistor Switching Output

Features ■Miniature design ■Parameterizable via IO-Link ■Analog output 4…20 mA (2-wire) ■Switching output ■Compression fitting process connection ■Bendable probe (min. bending radius: 3x outer diameter; excluding 30-mm probe tip) Functional principle All devices of the miniature transmi

Incremental Shaft Encoder Industrial Line

Features ■Clamping flange, Ø 58 mm ■Solid shaft, Ø 3/8” x 5/8” ■Optical measuring principle ■Shaft material, stainless steel ■Protection class IP67 on housing and shaft side ■‐40…+85 °C ■Max. 6000 rpm (continuous operation 3000 rpm) ■5…30 VDC ■Male connector, M12 x 1 , 8-pole ■RS422 wi

Pressure Transmitter – With Current Output (2-Wire)

Features ■Fully welded metal measuring cell ■Pressure range 0…14500 psi rel. ■10…30 VDC ■Analog output 4…20 mA ■Process connection 1/4-18 NPT male thread ■Plug-in device, M12 × 1 ■ATEX, IECEx ■Category II 1/2 GD, Ex zone 0 Functional principle The pressure sensors in the PT…‐2000 pro

Incremental Shaft Encoder Industrial Line

Features ■Clamping flange, Ø 58 mm ■Solid shaft, Ø 3/8” x 5/8” ■Optical measuring principle ■Shaft material, stainless steel ■Protection class IP67 on housing and shaft side ■‐40…+85 °C ■Max. 6000 rpm (continuous operation 3000 rpm) ■5…30 VDC ■Male connector, M12 x 1 , 8-pole ■RS422 wi

Temperature Detection – With Current Output and PNP/NPN Transistor Switching Output

Features ■Miniature design ■Parameterizable via IO-Link ■Analog output 4…20 mA (2-wire) ■Switching output ■Compression fitting process connection ■Bendable probe (min. bending radius: 3x outer diameter; excluding 30-mm probe tip) Functional principle The TTM miniature transmitters are a

Temperature Detection – With Current Output

Features ■Miniature design ■Analog output 4…20 mA ■Factory setting 10…650 °C ■Compression fitting process connection ■Bendable probe (min. bending radius: 3x outer diameter; excluding 30-mm probe tip) Functional principle The TTM miniature transmitters are available with integrated prob

Temperature Detection – With Current Output

Features ■Miniature design ■Analog output 4…20 mA ■Factory setting 10…650 °C ■Compression fitting process connection ■Bendable probe (min. bending radius: 3x outer diameter; excluding 30-mm probe tip) Functional principle The TTM miniature transmitters are available with integrated prob

TX800 HMI/PLC Product Series 5″ Display — CODESYS V3 PLC with TARGET and WEB VISU High-Quality Metal Housing and Glass Front with a Capacitive Touch

5 TFT wide screen color display ■ LED backlight ■ 800 x 480 pixel resolution ■ 64 K colors ■ Capacitive touchscreen with glass front ■ 2 separated RJ45 Ethernet ports with 10/100 Mbit ■ 1 serial interface (RS232, RS485, RS422) ■ 1 USB host port ■ 1 SD card slot ■ 1 expansion module slot

TX800 HMI/PLC Product Series 7″ Display — CODESYS V3 PLC with TARGET and WEB VISU High-Quality Metal Housing and Glass Front with a Capacitive Touch

■ 7 TFT wide screen color display ■ LED backlight ■ 800 x 480 pixel resolution ■ 16 M colors ■ Capacitive touchscreen with glass front ■ 1 RJ45 Ethernet port with 10/100/1000 Mbit ■ 2 RJ45 Ethernet ports with 10/100 Mbit ■ 1 serial interface (RS232, RS485, RS422) ■ 2 USB host ports ■ 1 S

TX800 HMI/PLC Product Series 10″ Display — CODESYS V3 PLC with TARGET and WEB VISU High-Quality Metal Housing and Glass Front with a Capacitive Touch

■ 10 TFT wide screen color display ■ LED backlight ■ 1280 x 800 pixel resolution ■ 16 M colors ■ Capacitive touchscreen with glass front ■ 1 RJ45 Ethernet port with 10/100/1000 Mbit ■ 2 RJ45 Ethernet ports with 10/100 Mbit ■ 1 serial interface (RS232, RS485, RS422) ■ 2 USB host ports ■ 1

TX800 HMI/PLC Product Series 15″ Display — CODESYS V3 PLC with TARGET and WEB VISU High-Quality Metal Housing and Glass Front with a Capacitive Touch

■ 15 TFT wide screen color display ■ LED backlight ■ 1366x768 pixel resolution ■ 16 M colors ■ Capacitive touchscreen with glass front ■ 1 RJ45 Ethernet port with 10/100/1000 Mbit ■ 2 RJ45 Ethernet ports with 10/100 Mbit ■ 1 serial interface (RS232, RS485, RS422) ■ 2 USB host ports ■ 1 S

TX800 HMI/PLC Product Series 21″ Display — CODESYS V3 PLC with TARGET and WEB VISU High-Quality Metal Housing and Glass Front with a Capacitive Touch

■ 21 TFT wide screen color display ■ LED backlight ■ 1920x1080 pixel resolution ■ 16 M colors ■ Capacitive touchscreen with glass front ■ 1 RJ45 Ethernet port with 10/100/1000 Mbit ■ 2 RJ45 Ethernet ports with 10/100 Mbit ■ 1 serial interface (RS232, RS485, RS422) ■ 2 USB host ports ■ 1

TX800 HMI/PLC Product Series Quad-Core IOT Gateway — CODESYS V3 PLC with WEB VISU

■ 2 separated RJ45 Ethernet ports with 10/100 Mbit ■ 1 serial interface (RS232, RS485, RS422) ■ 1 USB host port ■ 1 SD card slot ■ 1 expansion module slot

TX800 HMI/PLC Product Series Quad-Core IOT Gateway — CODESYS V3 PLC with WEB VISU

■ 1 RJ45 Ethernet port with 10/100/1000 Mbit ■ 2 RJ45 Ethernet ports with 10/100 Mbit ■ 1 serial interface (RS232, RS485, RS422) ■ 2 USB host ports ■ 1 SD card slot

HF Read/Write Head – For Bus Line Topology with TBEN-*

Features ■M12 × 1 threaded barrel ■Long version ■Chrome-plated brass ■Device without end termination ■Device may only be operated in line topology TBEN-S*-2RFID-* or TBENL*-4RFID-* ■Max. 32 nodes per line or connection permitted ■Use a corresponding terminating resistor (see accessories)

HF Read/Write Head

Features ■M12 × 1 threaded barrel ■Long version ■Chrome-plated brass ■Powered and operated only via connection to BL ident interface module ■M12 × 1 connector, connection only via BL ident extension cable Functional principle The HF read/write devices operating at a frequency of 13.56

Temperature Detection – With Current Output and PNP/NPN Transistor Switching Output

Features ■Miniature design ■Factory setting -25…100 °C ■Parameterizable via IO-Link ■Analog output 4…20 mA (2-wire) ■Switching output ■Compression fitting process connection ■Bendable probe (min. bending radius: 3x outer diameter; excluding 30-mm probe tip) Functional principle All dev

Pressure Transmitter – With Voltage Output (3-Wire)

Features ■For mobile hydraulic applications ■Fully welded metal measuring cell ■Sealless ■With pressure tip orifice ■Compact and robust design ■Excellent EMC properties ■Excellent accuracy and long-term stability ■Kfz-Norm ISO 16750 ■Pressure range 0…3000 psi rel. ■7…33 VDC ■Analog outp

Pressure Transmitter – With Voltage Output (3-Wire)

Features ■For mobile hydraulic applications ■Fully welded metal measuring cell ■Sealless ■With pressure tip orifice ■Compact and robust design ■Excellent EMC properties ■Excellent accuracy and long-term stability ■Kfz-Norm ISO 16750 ■Pressure range 500…4000 psi rel. ■7…33 VDC ■Analog ou

Isolating transducer 1-channel

The 1-channel isolating transducer IMCAIA-11Ex-i/24VDC features an intrinsically safe input circuit. The device can be mounted in zone 2. The device must be protected against mechanical load on connector and housing when mounted in zone 2 or 22. For this, use the TURCK cover plate IMC-SG (Ide

Temperature Detection – Probe

Features ■Pt 100 probe according to DIN EN 60751 ■Resistant to vibrations and shocks ■Connectable to TS, TTM, IM34, BL20, BL67 ■Max. temperature connector: 120°C ■Connection mode: 4-wire connection ■Process connection Tri-Clamp 1 1/2 Functional principle Resistance thermometers are used

Pressure Transmitter – IO-Link with Two Switching Outputs

Features ■Fully welded metal measuring cell ■Pressure range 0…10 bar rel. ■Pressure peak orifice ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection 1/4-18 NPT male thread ■Plug-in device, M12 × 1 Functional principle The pressure sensors in the PT…‐2000 produc

Pressure Transmitter – IO-Link with Two Switching Outputs

Features ■Fully welded metal measuring cell ■Pressure range 0…10 bar rel. ■Pressure peak orifice ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection G1/4'' male thread (back sealing) according to DIN EN ISO 1179-2 with FPM profile sealing ring ■Connector device, M1

Pressure Transmitter – IO-Link with Two Switching Outputs

Features ■Fully welded metal measuring cell ■Pressure range 0…10 bar rel. ■Pressure peak orifice ■18…33 V DC ■NO/NC contact, 2 × PNP/NPN outputs, IOLink ■Process connection G1/4 female thread, front sealing ■Connector device, M12 × 1 Functional principle The pressure sensors in the PT…

Pressure Transmitter – Ratiometric Output (3-Wire)

Features ■For mobile hydraulic applications ■Fully welded metal measuring cell ■Sealless ■With pressure tip orifice ■Compact and robust design ■Excellent EMC properties ■Excellent accuracy and long-term stability ■Kfz-Norm ISO 16750 ■Pressure range 0…250 bar rel. ■5 VDC ± 10 ■Ratiometr