GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

VOLTAGE - 6.8 TO 440 Volts 1500 Watt Peak Power 5.0 Watt Steady State FEATURES ● Plastic package has Underwriters Laboratory Flammability Classification 94V-O ● Glass passivated chip junction in Molded Plastic package ● 1500W surge capability at 1ms ● Excellent clamping capability

1500W TRANSIENT VOLTAGE SUPPRESSORS

Features ● Glass Passivated Die Construction ● 1500W Peak Pulse Power Dissipation ● 6.8V – 440V Standoff Voltage ● Uni- and Bi-Directional Versions Available ● Excellent Clamping Capability ● Fast Response Time ● Plastic Case Material has UL Flammability Classification Rating 94V-O

Discrete POWER & Signal Technologies

Features • Glass passivated junction. • 1500W Peak Pulse Power capability at 1.0 ms. • Excellent clamping capability. • Low incremental surge resistance. • Fast response time; typically less than 1.0 ps from 0 volts to BV for unidirectional and 5.0 ns for bidirectional. • Typical IR less tha

1500 WATT PEAK POWER TRANSIENT VOLTAGE SUPPRESSORS

VOLTAGE RANGE 6.8 to 440 Volts 1500 Watts Peak Power 5.0 Watts Steady State FEATURES * 1500 Watts Surge Capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Typical IR less than 1μA above 1

TRANSIENT VOLTAGE SUPPRESSOR

VBR : 6.8 - 440 Volts PPK : 1500 Watts FEATURES : * 1500W surge capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.) * Typical IR less then 1mA above 10V

1500 WATT AXIAL TRANSIENT VOLTAGE SUPPRESSORS

1500 WATT AXIAL TRANSIENT VOLTAGE SUPPRESSORS Protect sensitive electronics against voltage transients induced by inductive load switching and lightning. Ideal for the protection of I/O interfaces, Vcc bus, and other integrated circuits used in telecom, computer, datacom and industrial electronic

TRANSIENT ABSORPTION ZENER

DESCRIPTION The Transient Voltage Suppressor (TVS) series for 1N5908 & 1N6267-1N6303A are JEDEC registered selections for unidirectional devices. The popular series of 1.5KE6.8-1.5KE400CA offers similar voltages with an extended voltage range and also provides bidirectional options with a C o

TRANSZORB Transient Voltage Suppressors

Features • Underwriters Laboratory Recognition under UL standard for safety 497B: Isolated Loop Circuit Protection • Glass passivated junction • 1500W peak pulse power capabililty on 10/1000µs waveform, repetition rate (duty cycle): 0.05 • Excellent clamping capability • Low incremental surge

1500 Watt MosorbE Zener Transient Voltage Transient Voltage

1500 Watt Mosorb™ Zener Transient Voltage Suppressors Unidirectional* Mosorb devices are designed to protect voltage sensitive components from high voltage, high−energy transients. They have excellent clamping capability, high surge capability, low zener impedance and fast response time. These d

1500W TRANSIENT VOLTAGE SUPPRESSOR

1500W TRANSIENT VOLTAGE SUPPRESSOR Features ● 1500W Peak Pulse Power Dissipation ● Voltage Range 6.8V - 400V ● Constructed with Glass Passivated Die ● Uni- and Bidirectional Versions Available ● Excellent Clamping Capability ● Fast Response Time

TRANSZORB Transient Voltage Suppressors

1500W TRANSIENT VOLTAGE SUPPRESSOR Features ● 1500W Peak Pulse Power Dissipation ● Voltage Range 6.8V - 400V ● Constructed with Glass Passivated Die ● Uni- and Bidirectional Versions Available ● Excellent Clamping Capability ● Fast Response Time

Unidirectional & Bidirectional Transient Voltage Suppressors

DESCRIPTION The Transient Voltage Suppressor (TVS) series for 1N5908 & 1N6267-1N6303A are JEDEC registered selections for unidirectional devices. The popular series of 1.5KE6.8-1.5KE400CA offers similar voltages with an extended voltage range and also provides bidirectional options with a C o

Transient Voltage Suppressor Diodes

Voltage Range 6.8 to 440 Volts 1500 Watts Peak Power 5.0 Watts Steady State Features ◇ UL Recognized File # E-96005 ◇ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ◇ Exceeds environmental standards of MIL-STD-19500 ◇ 1500W surge capability at 10 x 100 us wavef

Silicon Avalanche Diodes - 1500 Watt Axial Leaded Transient Voltage Suppressors

Description The 1.5KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • Glass passivated chip junction in DO-201AE package • 1500W surge capability at 1.0ms • Excellent clamping capability • Low zener impedance • Fast response time: typically less than 1.0 ps from 0 volts

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE-6.8 TO 440 Volts 1500 watt Peak Power / 6.5 Watt Steady State

VOLTAGE - 6.8 to 440 Volts 1500 Watts Peak Power 6.5 Watt Steady State FEATURES • Plastic package • Glass passivated chip junction in DO-201 package • 1500W surge capability at 10/1000 µs wave from • Excellent clamping capability • Low zener impedance • Fast response time

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

VOLTAGE - 6.8 TO 440 Volts 1500 Watt Peak Power 5.0 Watt Steady State FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • Glass passivated chip junction in Molded Plastic package • 1500W surge capability at 1ms • Excellent clamping capability • Low

TRANSIL UNIAND BIDIRECTIONALTYPES

DESCRIPTION Transil diodes provide high overvoltage protection by clamping action. Their instantaneous response to transient overvoltages makes them particularly suited to protect voltage sensitive devices such as MOS Technology and low voltage supplied IC’s. FEATURES ■ PEAK PULSE POWER : 1500

TRANSIENT VOLTAGE SUPPRESSOR

BREAKDOWN VOLTAGE:6.8-440V PEAK PULSE POWER: 1500W FEATURES • 1500W peak pulse power capability • Excellent clamping capability • Low incremental surge resistance • Fast response time: typically less than 1.0ps from 0V to VBR for unidirectional and 5.0nS for bidirectional types. • H

TRANSZORB Transient Voltage Suppressors

FEATURES • Glass passivated chip junction • Available in uni-directional and bi-directional • 1500 W peak pulse power capability with a 10/1000 µs waveform, repetitive rate (duty cycle): 0.01 • Excellent clamping capability • Very fast response time • Low incremental surge resistance • Sol

1500W Surface Mount Transient Voltage Suppressor

VOLTAGE 6.8 to 550 Volts Peak Pulse Power 1500 Watt Features: * Plastic package * Glass passivated chip junction in DO-201 package * 1500W surge capability at 10/1000 µs wave form * Excellent clamping capability * Low zener impedance * Fast response time: typically lessl t

GLASS PASSIVATED UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS

REVERSE VOLTAGE - 6.8 to 440 Volts POWER DISSIPATION - 1500 Watts FEATURES ● Glass passivate chip ● Low leakage ● Uni and bidirectional unit ● Excellent clamping capability ● Plastic material has UL recognition 94V-0 ● Fast response time

TRANSIENT VOLTAGE SUPPRESSOR

BREAKDOWN VOLTAGE: 6.8 --- 550 V PEAK PULSE POWER: 1500 W FEATURES ◇ Plastic package has underwriters laboratory flammability classification 94V-0 ◇ Glass passivated junction ◇ 1500W peak pulse power capability with a 10/1000μs waveform, repetition rate (duty cycle): 0.01 ◇ Excellent clampin

1500 WATT PEAK POWER TRANSIENT VOLTAGE SUPPRESSORS

VOLTAGE RANGE 6.8 to 440 Volts 1500 Watts Peak Power 5.0 Watts Steady State FEATURES * 1500 Watts Surge Capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Typical IR less than 1 A abov

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

VOLTAGE- 6.8 TO 440 Volts 1500 Watt Peak Power 5.0 Watt Steady State FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94 V-O • Glass passivated chip junction in Molded Plastic package • 1500W surge capability at 1ms • Excellent clamping capability • Low

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSORS

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSORS Breakdown Voltage 6.8 to 440 Volts Peak Pulse Power 1500 Watts FEATURES · Plastic package has Underwriters Laboratory Flammability Classification 94V-O · Glass passivated junction or silastic guard junction (open junction) · 1500W p

VOLTAGE 6.8V ~ 440V 1500W Peak Power / 5.0W Steady State 1500W Peak Power TVS

FEATURES * 1500 Watts Surge Capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Typical IR less than 1 A above 10V * High temperature soldering guaranteed: 260 °C / 10 seconds / .375(9.5mm) lead

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

VOLTAGE 6.8 to 440 VOLTS 1500 WATT PEAK POWER 5.0 WATTS STEADY STATE FEATURES • Plastic package has Underwrites Laboratory Flammability Classification 94V-O • Glass passivated chip junction in Molded Plastic package • 1500W surge capability at 1 ms • Excellent clamping capab

TRANSIENT VOLTAGE SUPPRESSOR

FEATURES ♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ Glass passivated junction ♦ 1500W peak pulse power capability on 10/1000ns waveform repetition rate (duty cycle): 0.05 ♦ Excellent clamping capability ♦ Low incremental surge resistance ♦ Fast response

TRANSIENT VOLTAGE SUPPRESSOR

VBR : 6.8 - 440 Volts PPK : 1500 Watts FEATURES : * 1500W surge capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.) * Typical IR less then 1mA above 10V

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPESSOR

Breakdown Voltage:6.8-440 Volts Pesk Pulse Power:1500 Watts FEATURE ♦ 1500w peak pulse power capability ♦ Excellent clamping capability ♦ Low incremental surge resistance ♦ Fast response time:typically less than 1.0ps from 0v to VBR for unidirectional and 5.0ns ror bidirectional types. ♦

TRANSIENT VOLTAGE SUPPRESSOR

Stand - Off Voltage - 6.8 to 440 Volts Peak Pulse Power - 1500 Watt FEATURES ● Glass Passivated Die Construction ● Uni- and Bi-Directional Versions Available ● Excellent Clamping Capability ● Fast Response Time ● High Temperat Soldering Guaranteed : 265 °C/10 sec/.375. (9.5mm) Lead Length, 5

1500 Watt Transient Voltage Suppressors 6.8V to 550 Volts

Features • Economical Series and Quick Response • Available in Both Unidirectional and Bidirectional Construction • 1500Watts Peak Power Dissipation • Excellent Clamping Capability • UL Recognized File#E331408 • Lead Free Finish/RoHS Compliant(Note 1) (P Suffix designates RoHS Compliant. See

Transient Voltage Suppressors

GENERAL PURPOSE TRANSIENT SUPPRESSORS

Transient Voltage Suppressors Peak Pulse Power 1500W Breakdown Voltage 6.8 to 550V

Peak Pulse Power 1500W Breakdown Voltage 6.8 to 550V Features ● Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ● Glass passivated junction ● 1500W peak pulse power capabililty on 10/1000us waveform, repetition rate (duty cycle): 0.05 ● Excellent clamping

Transient Voltage Suppressors Breakdown Voltage 6.8 to 440V

Features • Plastic package • Excellent clamping capability • High temperature soldering guaranteed: 265℃/10 seconds, 0.375 (9.5mm) lead length, 5 lbs. (2.3kg) tension • Lead and body according with RoHS standard

1500W Transient Voltage Suppressor

Breakdown Voltage: 6.8 - 440 Volts Power: 1500 Watt Features - Plastic package has underwriters laboratory flammability classification 94V-0 - 1500W surge capability at 1ms - Excellent clamping capability - Low zener impedance - Fast response time:typically less than 1.0 ps from 0 Volts to

Unidirectional and bidirectional Transient Voltage Suppressor Diodes

• Peak pulse power dissipation 1500 W • Standard breakdown voltage range 6.8...440 V • Plastic case Ø 5.4 x 7.5 [mm] • Weight approx. 1.0 g • Plastic material has UL classification 94V-0 • Standard

Glass passivated junction. 1500W Peak Pulse Power capability at 1.0 ms.

Features • Glass passivated junction. • 1500W Peak Pulse Power capability at 1.0 ms. • Excellent clamping capability. • Low incremental surge resistance. • Fast response time; typically less than 1.0 ps from 0 volts to BV for unidirectional and 5.0 ns for bidirectional. • Typical IR less tha

TRANSZORB??TRANSIENT VOLTAGE SUPPRESSOR

Breakdown Voltage - 6.8 to 440 Volts Peak Pulse Power - 1500 Watts FEATURES ♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ Glass passivated junction ♦ 1500W peak pulse power capability on 10/1000µs waveform repetition rate (duty cycle): 0.05 ♦ Excellent clam

Transient Voltage Suppressors

Features 1. Halogen-free 2. Rohs compliant 3. Typical maximum temperature coefficient 4. ΔVBR =0.1xVBR@25°C x ΔT 5. Glass passivated Chip junction in DO-201 package 6. 1500W peak pulse capadility at 10x1000μs waveform,repetition rate (duty cycles):0.01 7. Fast response time:typically le

Axial Lead Transient Voltage Suppressors (TVS)

Features ♦ Glass passivated chip junction in DO-15 Package ♦ Low leakage ♦ Uni and Bidirectional unit ♦ Excellent clamping capability ♦ 600W Peak power capability at 10 × 1000µs waveform Repetition rate (duty cycle):0.01 ♦ Fast response time: typically less than 1.0ps from 0 Volts to VBR min

Transient Voltage Suppressors

FEATURES ◇ Plastic package. ◇ Glass passivated chip junction in DO-201 package. ◇ 1,500W surge capability at 10/1000μs waveform. ◇ Excellent clamping capability. ◇ Low zener impedance. ◇ Fast response time: typically less than 1.0ps from 0 volt to BV min. ◇ Typical IR less than 1μA above 10

Low zener impedance.

DESCRIPTION: The 1.5KE series of high current uni/bi-directional transient suppressors are designed for A.C. line protection and high power DC bus clamping applications. These devices offer uni/bi-directional port protection from 6.8 volts to 600 volts. They provide a clamping voltage lower than

GLASS PASSOVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE - 6.8 to 550 Volts

VOLTAGE - 6.8 to 550 Volts 1500 Watt Peak Power / 6.5 Watt Steady State FEATURES ◎ Plastic package ◎ Glass passivated chip junction in DO-201 package ◎ 1500W surge capability at 10/1000 µs wave form ◎ Excellent clamping capability ◎ Low zener impedance ◎ Fast response tim

REVERSE VOLTAGE 6.8 to 600 Volts PEAK PULSE POWER 1500 WATTS

REVERSE VOLTAGE 6.8 to 600 Volts PEAK PULSE POWER 1500 WATTS FEATURES * Glass passivated chip * 1500 W peak pulse power capability with a 10/1000μs waveform, repetitive rate (duty cycle):0.01 * Low leakage * Uni and Bidirectional unit * Excellent clamping capability * Very

Voltage 6.8V ~ 550V 1500W Peak Power / 5.0W Steady State 1500W Peak Power TVS

FEATURES * 1500 Watts Surge Capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Typical IR less than 1 A above 10V * High temperature soldering guaranteed: 260 °C / 10 seconds / .375(9.5mm) lead

1500 WattsTransient Voltage Suppressor Diodes

Features ◇ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ◇ 1500W surge capability at 10 x 1000 us waveform ◇ Excellent clamping capability ◇ Low Dynamic impedance ◇ Fast response time: Typically less than 1.0ps from 0 volts to VBR for unidirectional and 5.0 ns

1500W TRANSIENT VOLTAGE SUPPRESSORS

Features ● Glass Passivated Die Construction ● 1500W Peak Pulse Power Dissipation ● 6.8V – 440V Standoff Voltage ● Uni- and Bi-Directional Versions Available ● Excellent Clamping Capability ● Fast Response Time ● Plastic Case Material has UL Flammability Classification Rating 94V-O

1500 WATT PEAK POWER TRANSIENT VOLTAGE SUPPRESSORS

VOLTAGE RANGE 6.8 to 600 Volts 1500 Watts Peak Power FEATURES * 1500 Watts Surge Capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Typical IR less than 1 A above 10V * High temperature soldering g

Plastic package has UL flammability Classification 94V-0

Reverse Voltage: 6.8 to 440 V Peak Pulse Power: 1500 W Features • Plastic package has UL flammability Classification 94V-0 • 1500 W peak pulse power capability on 10/1000 µs waveform, repetition rate (duty cycle): 0.01 • Excellent clamping capability • Low incremental surge res

Axial Lead Transient Voltage Suppressors

1.5KE Series 6.8 To 600 V 1500W Description The 1.5KE series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ♦ Glass passivated chip junction in DO-201 Package ♦ Low leak

1500Watt Axial Lead Transient Voltage Suppressors

Features ● Glass Passivated Die Construction ● 1500W Peak Pulse Power Dissipation ● 6.8V – 440V Standoff Voltage ● Uni- and Bi-Directional Versions Available ● Excellent Clamping Capability ● Fast Response Time ● Plastic Case Material has UL Flammability Classification Rating 94V-O

GENERAL PURPOSE TRANSIENT SUPPRESSORS

GENERAL PURPOSE TRANSIENT SUPPRESSORS

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

1500 Watt Peak Power VOLTAGE 6.8 to 540 Volts 5.0 Watt Steady State FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • Glass passivated chip junction in DO-201AE package • 1500W surge capability at 1.0ms • Excellent clamping capability

6.8 to 440 Volts 1500 Watts Peak Power 5.0 Watts Steady State

VOLTAGE RANGE 6.8 to 440 Volts 1500 Watts Peak Power 5.0 Watts Steady State FEATURES * 1500 Watts Surge Capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Typical IR less than 1µA abov

TRANSIENT VOLTAGE SUPPRESSOR

Reverse Voltage - 6.8 to 400 Volts PEAK PULSE POWER-1500 Watts FEATURES • 1500 Watts Pulse capability • Excellent clamping capability • Low incremental surge resistance • Fast response time • High temperature soldering guaranteed: 260 C/10 seconds at terminals • Component inaccordance to R

Transient Voltage Suppressors

Description The 1.5KE series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features • Plastic material has UL flammability classification 94V-O • Typical IR less than 1uA above 12V • Fast res

Axial Lead Transient Voltage Suppressors (TVS)

1.5KE Series 6.8 To 600 V 1500W Description The 1.5KE series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ♦ Glass passivated chip junction in DO-201 Package ♦ Low leak

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPESSOR

Breakdown Voltage:6.8-440 Volts Pesk Pulse Power:1500 Watts FEATURE ♦ 1500w peak pulse power capability ♦ Excellent clamping capability ♦ Low incremental surge resistance ♦ Fast response time:typically less than 1.0ps from 0v to VBR for unidirectional and 5.0ns ror bidirectional types. ♦ Hig