1500 Watt Mosorb Zener Transient Voltage Suppressors

1500 Watt Mosorb™ Zener Transient Voltage Suppressors Bidirectional* Mosorb devices are designed to protect voltage sensitive components from high voltage, high–energy transients. They have excellent clamping capability, high surge capability, low zener impedance and fast response time. These de

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

VOLTAGE - 6.8 TO 440 Volts 1500 Watt Peak Power 5.0 Watt Steady State FEATURES ● Plastic package has Underwriters Laboratory Flammability Classification 94V-O ● Glass passivated chip junction in Molded Plastic package ● 1500W surge capability at 1ms ● Excellent clamping capability

1500W TRANSIENT VOLTAGE SUPPRESSORS

Features ● Glass Passivated Die Construction ● 1500W Peak Pulse Power Dissipation ● 6.8V – 440V Standoff Voltage ● Uni- and Bi-Directional Versions Available ● Excellent Clamping Capability ● Fast Response Time ● Plastic Case Material has UL Flammability Classification Rating 94V-O

Discrete POWER & Signal Technologies

Features • Glass passivated junction. • 1500W Peak Pulse Power capability at 1.0 ms. • Excellent clamping capability. • Low incremental surge resistance. • Fast response time; typically less than 1.0 ps from 0 volts to BV for unidirectional and 5.0 ns for bidirectional. • Typical IR less tha

1500 WATT AXIAL TRANSIENT VOLTAGE SUPPRESSORS

1500 WATT AXIAL TRANSIENT VOLTAGE SUPPRESSORS Protect sensitive electronics against voltage transients induced by inductive load switching and lightning. Ideal for the protection of I/O interfaces, Vcc bus, and other integrated circuits used in telecom, computer, datacom and industrial electronic

1500W TRANSIENT VOLTAGE SUPPRESSOR

1500W TRANSIENT VOLTAGE SUPPRESSOR Features ● 1500W Peak Pulse Power Dissipation ● Voltage Range 6.8V - 400V ● Constructed with Glass Passivated Die ● Uni- and Bidirectional Versions Available ● Excellent Clamping Capability ● Fast Response Time

TRANSZORB Transient Voltage Suppressors

1500W TRANSIENT VOLTAGE SUPPRESSOR Features ● 1500W Peak Pulse Power Dissipation ● Voltage Range 6.8V - 400V ● Constructed with Glass Passivated Die ● Uni- and Bidirectional Versions Available ● Excellent Clamping Capability ● Fast Response Time

Transient Voltage Suppressor Diodes

Voltage Range 6.8 to 440 Volts 1500 Watts Peak Power 5.0 Watts Steady State Features ◇ UL Recognized File # E-96005 ◇ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ◇ Exceeds environmental standards of MIL-STD-19500 ◇ 1500W surge capability at 10 x 100 us wavef

Silicon Avalanche Diodes - 1500 Watt Axial Leaded Transient Voltage Suppressors

Description The 1.5KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • Glass passivated chip junction in DO-201AE package • 1500W surge capability at 1.0ms • Excellent clamping capability • Low zener impedance • Fast response time: typically less than 1.0 ps from 0 volts

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE-6.8 TO 440 Volts 1500 watt Peak Power / 6.5 Watt Steady State

VOLTAGE - 6.8 to 440 Volts 1500 Watts Peak Power 6.5 Watt Steady State FEATURES • Plastic package • Glass passivated chip junction in DO-201 package • 1500W surge capability at 10/1000 µs wave from • Excellent clamping capability • Low zener impedance • Fast response time

1500W Surface Mount Transient Voltage Suppressor

VOLTAGE 6.8 to 550 Volts Peak Pulse Power 1500 Watt Features: * Plastic package * Glass passivated chip junction in DO-201 package * 1500W surge capability at 10/1000 µs wave form * Excellent clamping capability * Low zener impedance * Fast response time: typically lessl t

Glass passivated junction. 1500W Peak Pulse Power capability at 1.0 ms.

Features • Glass passivated junction. • 1500W Peak Pulse Power capability at 1.0 ms. • Excellent clamping capability. • Low incremental surge resistance. • Fast response time; typically less than 1.0 ps from 0 volts to BV for unidirectional and 5.0 ns for bidirectional. • Typical IR less tha

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

VOLTAGE - 6.8 TO 440 Volts 1500 Watt Peak Power 5.0 Watt Steady State FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • Glass passivated chip junction in Molded Plastic package • 1500W surge capability at 1ms • Excellent clamping capability • Low

TRANSIL UNIAND BIDIRECTIONALTYPES

DESCRIPTION Transil diodes provide high overvoltage protection by clamping action. Their instantaneous response to transient overvoltages makes them particularly suited to protect voltage sensitive devices such as MOS Technology and low voltage supplied IC’s. FEATURES ■ PEAK PULSE POWER : 1500

TRANSIENT VOLTAGE SUPPRESSOR

VBR : 6.8 - 440 Volts PPK : 1500 Watts FEATURES : * 1500W surge capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.) * Typical IR less then 1mA above 10V

GLASS PASSIVATED UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS

REVERSE VOLTAGE - 6.8 to 440 Volts POWER DISSIPATION - 1500 Watts FEATURES ● Glass passivate chip ● Low leakage ● Uni and bidirectional unit ● Excellent clamping capability ● Plastic material has UL recognition 94V-0 ● Fast response time

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

VOLTAGE- 6.8 TO 440 Volts 1500 Watt Peak Power 5.0 Watt Steady State FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94 V-O • Glass passivated chip junction in Molded Plastic package • 1500W surge capability at 1ms • Excellent clamping capability • Low

TRANSIENT VOLTAGE SUPPRESSOR

Stand - Off Voltage - 6.8 to 440 Volts Peak Pulse Power - 1500 Watt FEATURES ● Glass Passivated Die Construction ● Uni- and Bi-Directional Versions Available ● Excellent Clamping Capability ● Fast Response Time ● High Temperat Soldering Guaranteed : 265 °C/10 sec/.375. (9.5mm) Lead Length, 5

1500 Watt Transient Voltage Suppressors 6.8V to 550 Volts

Features • Economical Series and Quick Response • Available in Both Unidirectional and Bidirectional Construction • 1500Watts Peak Power Dissipation • Excellent Clamping Capability • UL Recognized File#E331408 • Lead Free Finish/RoHS Compliant(Note 1) (P Suffix designates RoHS Compliant. See

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

VOLTAGE 6.8 to 440 VOLTS 1500 WATT PEAK POWER 5.0 WATTS STEADY STATE FEATURES • Plastic package has Underwrites Laboratory Flammability Classification 94V-O • Glass passivated chip junction in Molded Plastic package • 1500W surge capability at 1 ms • Excellent clamping capab

GLASS PASSOVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE - 6.8 to 550 Volts

VOLTAGE - 6.8 to 550 Volts 1500 Watt Peak Power / 6.5 Watt Steady State FEATURES ◎ Plastic package ◎ Glass passivated chip junction in DO-201 package ◎ 1500W surge capability at 10/1000 µs wave form ◎ Excellent clamping capability ◎ Low zener impedance ◎ Fast response tim

Voltage 6.8V ~ 550V 1500W Peak Power / 5.0W Steady State 1500W Peak Power TVS

FEATURES * 1500 Watts Surge Capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Typical IR less than 1 A above 10V * High temperature soldering guaranteed: 260 °C / 10 seconds / .375(9.5mm) lead

Transient Voltage Suppressors

FEATURES ◇ Plastic package. ◇ Glass passivated chip junction in DO-201 package. ◇ 1,500W surge capability at 10/1000μs waveform. ◇ Excellent clamping capability. ◇ Low zener impedance. ◇ Fast response time: typically less than 1.0ps from 0 volt to BV min. ◇ Typical IR less than 1μA above 10

Axial Lead Transient Voltage Suppressors (TVS)

Features ♦ Glass passivated chip junction in DO-15 Package ♦ Low leakage ♦ Uni and Bidirectional unit ♦ Excellent clamping capability ♦ 600W Peak power capability at 10 × 1000µs waveform Repetition rate (duty cycle):0.01 ♦ Fast response time: typically less than 1.0ps from 0 Volts to VBR min

1500W TRANSIENT VOLTAGE SUPPRESSORS

Features ● Glass Passivated Die Construction ● 1500W Peak Pulse Power Dissipation ● 6.8V – 440V Standoff Voltage ● Uni- and Bi-Directional Versions Available ● Excellent Clamping Capability ● Fast Response Time ● Plastic Case Material has UL Flammability Classification Rating 94V-O

Plastic package has UL flammability Classification 94V-0

Reverse Voltage: 6.8 to 440 V Peak Pulse Power: 1500 W Features • Plastic package has UL flammability Classification 94V-0 • 1500 W peak pulse power capability on 10/1000 µs waveform, repetition rate (duty cycle): 0.01 • Excellent clamping capability • Low incremental surge res

1500Watt Axial Lead Transient Voltage Suppressors

Features ● Glass Passivated Die Construction ● 1500W Peak Pulse Power Dissipation ● 6.8V – 440V Standoff Voltage ● Uni- and Bi-Directional Versions Available ● Excellent Clamping Capability ● Fast Response Time ● Plastic Case Material has UL Flammability Classification Rating 94V-O

Fast response time: typically less than 1 ns

Features • Working peak reverse voltage range – 58.1V. • Peak power dissipation 1500W @10 x 1000 us Pulse • Excellent clamping capability. • Fast response time: typically less than 1 ns. • Typical IR less than 1uA above 10V. • Plastic material has UL flammability classification 9

Axial Lead Transient Voltage Suppressors (TVS)

1.5KE Series 6.8 To 600 V 1500W Description The 1.5KE series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ♦ Glass passivated chip junction in DO-201 Package ♦ Low leak

REVERSE VOLTAGE 6.8 to 600 Volts PEAK PULSE POWER 1500 WATTS

REVERSE VOLTAGE 6.8 to 600 Volts PEAK PULSE POWER 1500 WATTS FEATURES * Glass passivated chip * 1500 W peak pulse power capability with a 10/1000μs waveform, repetitive rate (duty cycle):0.01 * Low leakage * Uni and Bidirectional unit * Excellent clamping capability * Very

Transient Voltage Suppressors

Description The 1.5KE series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features • Plastic material has UL flammability classification 94V-O • Typical IR less than 1uA above 12V • Fast res

TRANSIENT VOLTAGE SUPPRESSOR

Features · Underwriters Laboratory recognition under UL standard for safety 497B : Isolated loop circuit protection · Glass passivated junction · 1500W peak pulse power capability on 10/1000μs waveform, repetition rate(duty cycle) : 0.05 · Excellent clamping capability · Low incremental s

Transient Voltage Suppressor Diodes

Features ● Excellent clamping capability ● Low dynamic impedance ● Solder dip 275 °C max. 7 s, per JESD 22-B106

TRANSIENT VOLTAGE SUPPRESSOR

Features Glass Passivated Die Construction 1500W Peak Pulse Power Dissipation 5.5V – 513V Standoff Voltage Uni- and Bi-Directional Versions Available Excellent Clamping Voltage Typical Response Time

6.8 To 600V 1500W Axial Lead Transient Voltage Suppressors (TVS)

Features  Glass passivated chip junction in DO-201 Package  Low leakage  Uni and Bidirectional unit  Excellent clamping capability  1500W Peak power capability at 10 × 1000μs waveform Repetition rate (duty cycle):0.01  Fast response time: typically less than 1.0ps from 0 Volts to VB

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR PEAK PULSE POWER 1500 Watts

FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • Glass passivated chip junction in DO-201AE package • 1500W surge capability at 1.0ms • Excellent clamping capability • Low zener impedance • Fast response time: typically less than 1.0 ps from 0 volts

1500W TRANSIENT VOLTAGE SUPPRESSOR

Glass Passivated Die Construction 1500W Peak Pulse Power Dissipation 5.5V – 513V Standoff Voltage Uni- and Bi-Directional Versions Available Excellent Clamping Voltage Typical Response Time

TRANSIENT VOLTAGE SUPPRESSOR

Glass Passivated Die Construction 1500W Peak Pulse Power Dissipation Bi-Directional Versions Available Excellent Clamping Capability Fast Response Time Plastic Case Material has UL Flammability Classification Rating 94V-O This is a Pb − Free Device All SMC Parts are Traceable to the Wafer

Diodes Unidirectional and Bidirectional

Features • Glass passivate chip • Low leakage • Uni and bidirectional unit • Excellent clamping capability • Plastic material has UL recognition 94V-0 • Fast response time

1.5KE Series Protection Diodes Transient Voltage Suppressors

Features: • Glass passivated chip junction in moulded plastic package • 1,500 W surge capability at 1 ms • Low zener impedance • Excellent clamping capability • Fast response time : Typically less than 1 ps from 0 volts to BV minimum • Typical IR less than 1 µA above 10 V • High temperature

1500W Axial Lead Transient Voltage uppressors - 6.8V-440V

Features • Axial lead type devices for through hole design. • 1500W peak pulse power capability with a 10/1000us waveform, repetition rate (duty cycle): 0.05. • Excellent clamping capability. • Low incremental surge resistance. • Fast response time from 0V to VBR, typically less than

1500W 30V TVS transient suppressor diode

文件：677.064 Kbytes Page：5 Pages

AXIAL LEADED TRANSIENT VOLTAGE SUPPRESSOR DIODE

文件：678.027 Kbytes Page：5 Pages

Transient voltage suppressor power 1500 watts

文件：1.40278 Mbytes Page：6 Pages

Unidirectional and Bidirectional Transient Voltage Suppressors

文件：472.63 Kbytes Page：4 Pages

1500 WattsTransient Voltage Suppressor Diodes

文件：216.83 Kbytes Page：4 Pages

Transient Voltage Suppressor Diodes

文件：216.81 Kbytes Page：5 Pages

Transient Voltage Suppression Diodes

文件：141.84 Kbytes Page：5 Pages

1500W Unidirectional and Bidirectional Transient Voltage Suppressor Diodes

文件：91.93 Kbytes Page：6 Pages

UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS

文件：112.84 Kbytes Page：4 Pages

1500 Watt Transient Voltage Suppressors 6.8V to 550 Volts

文件：927.5 Kbytes Page：4 Pages

Surface Mount Transient Voltage Suppressors (TVS)

文件：3.90527 Mbytes Page：56 Pages

Axial Lead Transient Voltage Suppressors

文件：269.37 Kbytes Page：4 Pages

Transient Voltage Suppressor

文件：1.09525 Mbytes Page：5 Pages

1500 WattsTransient Voltage Suppressor Diodes

文件：1.48751 Mbytes Page：4 Pages

1.5KE Transient Voltage Suppressor Diode Series

文件：682.58 Kbytes Page：5 Pages

1500W Transient Voltage Suppressor

文件：886.64 Kbytes Page：5 Pages

1500 WattsTransient Voltage Suppressor Diodes

文件：216.83 Kbytes Page：4 Pages

1500W Transient Voltage Suppressors

文件：365.98 Kbytes Page：5 Pages