PNP SILICON PLANAR MEDIUM POWER HIGH CURRENT TRANSISTOR

PNP SILICON PLANAR MEDIUM POWER HIGH CURRENT TRANSISTOR * 4 Amps continuous current * Up to 15 Amps peak current * Very low saturation voltage * Excellent gain up to 10 Amps * Spice model available

PNP SILICON PLANAR MEDIUM POWER HIGH CURRENT TRANSISTOR

PNP SILICON PLANAR MEDIUM POWER HIGH CURRENT TRANSISTOR * 4 Amps continuous current * Up to 15 Amps peak current * Very low saturation voltage * Excellent gain up to 10 Amps * Spice model available

Gate Driver

Description: M57161L-01 is a hybrid integrated circuit designed for driving Powerex F-Series IGBT modules. This gate driver converts logic level control signals into high current gate drive with suitable on and off bias voltages. Electrical isolation of the input control signal is provided by an

封装/外壳：E-Line-3 包装：散装 描述：TRANS PNP 60V 4A E-LINE 分立半导体产品 晶体管 - 双极性晶体管（BJT）- 单个

PNP, 60V, 4A, E-Line

PNP SILICON PLANAR MEDIUM POWER HIGH CURRENT TRANSISTOR

文件：75.2 Kbytes Page：3 Pages

封装/外壳：E-Line-3，成型引线 包装：卷带（TR） 描述：TRANS PNP 60V 4A E-LINE 分立半导体产品 晶体管 - 双极性晶体管（BJT）- 单个

LOW VOLTAGE PLL CLOCK DRIVER

Low Voltage PLL Clock Driver The MPC950/951 are 3.3V compatible, PLL based clock driver devices targeted for high performance clock tree designs. With output frequencies of up to 180MHz and output skews of 375ps the MPC950 is ideal for the most demanding clock tree designs. The devices employ a f

Integrated Circuit Positive 3 Terminal Voltage Regulator, 100mA

Description: The NTE950, NTE951, and NTE977 are positive 3–terminal voltage regulators in available in a TO92 type package. With adequate heat sinking these regulators can deliver 100mA output current. Current limiting is included to limit peak output current to safe value. Safe area protection

UHF wideband transistor

DESCRIPTION Silicon NPN transistor in a surface mount 3-pin SOT23 package. The transistor is primarily intended for wideband applications in the GHz-range in the RF front end of analog and digital cellular telephones, cordless phones, radar detectors, pagers and satellite TV-tuners. FEATURES •

INPUT/OUTPUT RAIL TO RAIL LOW POWER OPERATIONAL AMPLIFIERS

Description The TS95x family are rail-to-rail BiCMOS operational amplifiers optimized and fully specified for 3V and 5V operation. The TS951 is housed in the space-saving 5 pins SOT23 package that makes it well suited for battery-powered systems. This micropackage simplifies the PC board design

INPUT/OUTPUT RAIL TO RAIL LOW POWER OPERATIONAL AMPLIFIERS

Description The TS95x family are rail-to-rail BiCMOS operational amplifiers optimized and fully specified for 3V and 5V operation. The TS951 is housed in the space-saving 5 pins SOT23 package that makes it well suited for battery-powered systems. This micropackage simplifies the PC board design