Caps 3070-B.. cover series 307/3070 connector blocks.

The tab receptacle crimping points protrude the housing by approx. 6 mm. When

using our insulation sleeves, the cover caps completely insulate the connectors.

Depending on the number of poles, one or two BEF-3070 securing pins are

required. After wiring, the pins are inserted through the mounting holes into the

tubular rivets of the package. By pulling out the pins with a tool, the cap can be

removed.

ORDERING NOTE:

..-B1 = 1 mounting holes

..-B2 = 2 mounting holes