The plug-in terminal strip 302-NFLW-DS, low version, is available in 8 mm pitch

with 2 to 12 poles.

It has one screw connection per pole and one vertical plug connection to a terminal

strip with pins.

Contact spring and wire protector form one unit and offers good connection

performance for applications requiring small plugging and pulling forces and low

contact resistance. The wire protection reliably prevents damage to flexible wires

by the turning screw.

The funnel-shaped insertion bushings guarantee perfect pin guidance and optimum

contact protection.

The “N”-variant only differs from the standard 302-FLW-DS version by the 12 mm

overall height (i.e. the moulding height is 3 mm lower). This allows for a more

compact angular plug connection to the 302-NSV terminal strip. Note the

shortened clearance and creepage distances.

Plug-in terminal strip 302-NSLW creates a plug connection with wire entrances

located parallel on top of each other which requires relatively little mounting space.

That is why tensile forces on the wires have no direct effect on the contact

performance.

This arrangement does not allow for the connection of an earth lead.