120-M-227-SMD is a pin strip with a pitch of 5 mm for surface mount technology

and suitable for all plugs of the plug connector system of series of 120 and

available in lengths from 2 to 22 poles.

The solder retention devices (SMT anchors) on either side of the terminal housing

provide an exceptionally high retention force for the terminal block to the PCB.

The most significant benefit of this design is the protection it provides to the solder

joints against stresses encountered in field-installations. The product eliminates

completely CTE mismatch (Coefficient of thermal expansion) and provide total

coplanarity by the position adapting pins.

For the automatic assembling process, all pin strip versions are packed Tape on

Reel and are equipped with high temperature resistant pick caps, which can

comfortably be removed after the soldering process.

Plug-In direction vertical to PCB and wire entrance parallel to PCB when plugged

with 120-D-111, 120-D-121

Plug-In direction and wire entrance vertical to PCB when plugged with 120-A-111.