USB Power Delivery (USB PD) controller

\nThe WT6619F is a dual-port USB Power Delivery (USB PD) controller that supports USB PD 3.0 specification. It can be configured as a dual-role device (external circuitry required) and supported functions including cable attached/detached detection, cable plug orientation/twist detection, and Dual-r \n●Integrated two USB-PD PHYs\n - Supports USB PD 3.0\n - Programmable USB Type-C pull-up Rp\n - Integrated VCONN power and switch for reading E-marked cable\n●Integrated two USB charge detect blocks, supports USB BC1.2 DCP\n●Integrated two VBUS voltage/current control\n - Programmable constant volt;

Dual USB Power Control Switch

[Weltrend Semiconductor, Inc. ] GENERAL DESCRIPTION The WT6621 is a dual integrated power switch optimized for self-powered and bus-powered Universal Serial Bus (USB) applications. Few external components are necessary to satisfy USB requirements. With independent enable and error flag functions

Dual USB Power Control Switch

[Weltrend Semiconductor, Inc. ] GENERAL DESCRIPTION The WT6621 is a dual integrated power switch optimized for self-powered and bus-powered Universal Serial Bus (USB) applications. Few external components are necessary to satisfy USB requirements. With independent enable and error flag functions

Dual USB Power Control Switch

[Weltrend Semiconductor, Inc. ] GENERAL DESCRIPTION The WT6621 is a dual integrated power switch optimized for self-powered and bus-powered Universal Serial Bus (USB) applications. Few external components are necessary to satisfy USB requirements. With independent enable and error flag functions

Dual USB Power Control Switch

[Weltrend Semiconductor, Inc. ] GENERAL DESCRIPTION The WT6621 is a dual integrated power switch optimized for self-powered and bus-powered Universal Serial Bus (USB) applications. Few external components are necessary to satisfy USB requirements. With independent enable and error flag functions

Dual USB Power Control Switch

[Weltrend Semiconductor, Inc. ] GENERAL DESCRIPTION The WT6621 is a dual integrated power switch optimized for self-powered and bus-powered Universal Serial Bus (USB) applications. Few external components are necessary to satisfy USB requirements. With independent enable and error flag functions

USB Power and Charging Port Controllers

\nThe WT6622 is a highly integrated USB Type-C E-marker IC that supports USB PD 3.0 and Type-C 1.3 specifications designed for Type-C passive cables. The WT6622 minimizes external components by integrating isolation diodes, Ra resistors, and linear regulator to allow small form factor and low BOM co \n●USB Power Delivery Rev. 3.0 compliant\n●USB Type-C Rev. 1.3 compliant\n●USB-IF certification TID: 1000161, XID: 0005476\n●Support Structured VDM Discovery Identity command directed to SOP’\n●Support Get Manufacturer Information Message directed to SOP’\n●Embedded isolation diodes\n●Embedded Ra re;

Dual USB power control switch