General Description

The VSC7135 is a 1.25Gb/s Ethernet Transceiver optimized for Gigabit Ethernet or 1000Base-X applications. It accepts 10-bit 8B/10B encoded transmit data, latches it on the rising edge of REFCLK and serializes it onto the TX PECL differential outputs at a baud rate which is ten times the REFCLK frequency. The VSC7135 also samples serial receive data on the RX PECL differential inputs, recovers the clock and data, deserializes it onto the 10-bit receive data bus, outputs two recovered clocks at one-twentieth of the incoming baud rate and detects “Comma” characters. The VSC7135 contains on-chip PLL circuitry for synthesis of the baud-rate transmit clock, and extraction of the clock from the received serial stream. These circuits are fully monolithic and require no external components.

Features

• Gigabit Ethernet Transceiver @ 1.25Gb/s

• Compliant to IEEE 802.3Z PMA

• TTL Interface Compatible to PMA-TBI

• Monolithic Clock Synthesis and Clock

Recovery - No External Components

• 125MHz TTL Reference Clock

• Low Power Operation - 700 mW

• Suitable for Both Coaxial or Optical Link

Applications

• 64 Pin, 14mm or 10mm Standard PQFP

• Single +3.3V Supply