High Precision Bulk Metal® Foil Extended Value Range Resistor, with TCR of 2 ppm/°C, Tolerance to 0.005 , and Power Rated at 0.6 W

Bulk Metal® foil (BMF) technology outperforms all other resistor technologies available today for applications that require high precision and high stability.

This technology has been pioneered and developed by VISHAY, and products based on this technology are the most suitable for a wide range of applications. BMF technology allows us to produce customer orientated products, designed to satisfy challenging and specific technical requirements.

The E102C (0.150 lead spacing) and E102J (0.200 lead spacing) extends the range of the high precision aerospace and instrumentation standard S102C/J from 150K to 300K.

Our application engineering department is available to advise and to make recommendations. For non-standard technical requirements and special applications, please contact us.

FEATURES

• Temperature coefficient of resistance (TCR):

   - 55 °C to + 125 °C, + 25 °C ref.

   2 ppm/°C typical

• Rated power: to 0.3 W at + 125 °C

• Tolerance: ± 0.005

• Load life stability: to ± 0.005 at 70 °C, 2000 h at rated

   power

• Resistance range: 150 kΩ to 300 kΩ (higher and lower

   values of resistance are available)

• Electrostatic discharge (ESD) above 25 000 V

• Non inductive, non capacitive design

• Rise time: 1 ns without ringing

• Current noise: < - 40 dB

• Thermal EMF: 0.05 µV/°C typical

• Voltage coefficient < 0.1 ppm/V

• Low inductance: < 0.08 µH typical

• Non hot spot design

• Terminal finishes available: lead (Pb)-free

                                               tin/lead alloy

• Matched sets are available on request

   (TCR tracking: to 0.5 ppm/°C)

• For better TCR and PCR performances please review the

   E102Z datasheet