FEATURES

• Long and flexible leads for special mounting or

assembly requirements

• Best accuracy of ± 0.5 °C between 25 °C and

85 °C and ± 1.0 °C between -55 °C and 150 °C

• Electrical features of “accuracy line” sensors

• Mounting: radial insulated leads, low

heat-conducting FeNi wires

• AEC-Q200 qualified

• Fast response time of 0.3 s with small 1.6 mm head Ø

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

APPLICATIONS

Temperature measurement, sensing and control in

automotive and industrial applications as e.g. battery cells

and packs.

DESCRIPTION

These negative temperature coefficient thermistors consist

of a mini-chip soldered between two AWG #32 PEEK

insulated silver plated nickel / iron leads and coated with

ocher colored epoxy lacquer. High adhesive strength

between PEEK wire and encapsulating lacquer.

PACKAGING

The thermistors are packed in cardboard boxes; the

smallest packing quantity is 1000 units.

MARKING

The component is not marked.

MOUNTING

Important mounting and handling instructions: see

www.vishay.com/doc?29222

By soldering or crimping the wire end in any position. The

body can be inserted in a tube, free in air, tape attached or

glued.