.025 NPN Phototransistors

PRODUCT DESCRIPTION A small area high speed NPN silicon phototransistor mounted in a lensed, side looking, transparent plastic, transfer molded package. These devices are spectrally and mechanically matched to the VTE717x series of IREDs.

Low-cost visible and near-IR photodetection

文件：275.47 Kbytes Page：3 Pages

CMOS 80 MHz, Triple 10-Bit Video DACs

GENERAL DESCRIPTION The ADV7121/ADV7122 (ADV®) is a video speed, digital-to-analog converter on a single monolithic chip. The part is specifically designed for high resolution color graphics and video systems including high definition television (HDTV). It is also ideal for any application requir

Rail-to-Rail Dual Op Amp Preliminary Information

General Description The MIC7122 is a dual high-performance CMOS operational amplifier featuring rail-to-rail inputs and outputs. The input common-mode range extends beyond the rails by 300mV, and the output voltage swings to within 150µV of both rails when driving a 100kΩ load. Features • Smal

Rail-to-Rail Dual Op Amp Preliminary Information

General Description The MIC7122 is a dual high-performance CMOS operational amplifier featuring rail-to-rail inputs and outputs. The input common-mode range extends beyond the rails by 300mV, and the output voltage swings to within 150µV of both rails when driving a 100kΩ load. Features • Smal

Quad Port Bypass Circuit for 1.0625 Gbit/sec Fibre Channel Arbitrated Loop Disk Arrays

General Description The VSC7122 is a Quad Port Bypass Circuit (PBC). Four Fibre Channel PBC’s are cascaded into a single part to minimize part count, cost, high frequency routing, and jitter accumulation. Port Bypass Circuits are used to provide resiliency in Fibre Channel Arbitrated Loop (FC-AL)

Quad Port Bypass Circuit for 1.0625 Gbit/sec Fibre Channel Arbitrated Loop Disk Arrays

General Description The VSC7122 is a Quad Port Bypass Circuit (PBC). Four Fibre Channel PBC’s are cascaded into a single part to minimize part count, cost, high frequency routing, and jitter accumulation. Port Bypass Circuits are used to provide resiliency in Fibre Channel Arbitrated Loop (FC-AL)