快速响应硅光电二极管

这种快速响应的硅光电二极管的感光面积为0.684mm2，光谱响应范围介于400nm至1150nm之间。我们的系列快速响应光电二极管设计用于提供低结电容，可实现快速响应能力。它们适合在反向偏压条件下工作，提高响应速度，也可用于光伏模式。这些光电二极管在IR区域有很好的响应，并且与IR发光二极管非常匹配。\n\n功能与优点：\n\n可见光至IR光谱范围\n\n峰值波长：925nm，感光面积小\n\n线性范围1-2%，可适使用70到 90年\n\n低暗电流\n\n高分流电阻\n\n低结电容\n\n快速响应\n\n符合RoHS指令标准\n\n应用领域：\n\n烟雾检测\n\n条形码扫描\n\n • 感光面积 = 0.684 mm2• 短路电流=在100fc，2850K时，最小值为6 µA，• 响应度=通常为0.015 A/(W/cm2), 940 nm• 暗电流=在10V反向偏压时，最大值为35nA• 结电容 = 最大值25 pF（反向偏压为3 V时）• 光谱范围 = 400 nm至1150 nm• 峰值光谱响应=925 nm• 峰值波长的灵敏度=通常为0,55A/W• 角响应=50%响应时成±58度，;

VTP Process Photodiodes

PRODUCT DESCRIPTION Small area planar silicon photodiode in a clear, lensed sidelooking package. These diodes exhibit low dark current under reverse bias and fast speed of response.

1.2W Audio Power Amplifier

Description The AN7110 is a monolithic integrated circuit designed for audio power amplifier in portable radio sets.

Integrated Circuit 3 Channel Analog Switch

Description: The NTE7110 is an integrated circuit in a 16–Lead DIP type package designed for use as an electronic switch in VCR and audio signal processing applications. This device contains three channel two input switch circuits with each switch being controlled independently. Features: ● Low

One Chip Front-end 1 OCF1

GENERAL DESCRIPTION The one chip front-end SAA7110; SAA7110A is a digital multistandard colour decoder (OCF1) on the basis of the DIG-TV2 system with two integrated Analog-to-Digital Converters (ADCs), a Clock Generation Circuit (CGC) and Brightness Contrast Saturation (BCS) control. FEATURES •

Silicon planar type

文件：58.34 Kbytes Page：4 Pages