3.3V 16-bit buffer/driver with 30ohm termination resistors

DESCRIPTION The 74LVT162244B is a high-performance BiCMOS product designed for VCC operation at 3.3V. The 74LVT162244B is designed with 30Ω series resistance in both the High and Low states of the output. This design reduces line noise in applications such as memory address drivers, clock drivers

3.3V 16-bit buffer/driver with 30ohm termination resistors

HIGH ENVIRONMENTAL RESISTANCE

FEATURES • Subminiature size (19.8×11.1×6.4 mm) (.780×.437×.252 inch) • Sealed construction for use in adverse environment-Sealed construction by epoxy resin and rubber cap keeps off the cause of miscontact such as dust. Conforming to IP67* of IEC protective construction classification • Elas

16-bit buffer/line driver with 30ohm termination resistor 3-State

DESCRIPTION The 74ALVCH162244 is a high-performance, low-power, low-voltage, Si-gate CMOS device, superior to most advanced CMOS compatible TTL families. The 74ALVCH162244 is a 16-bit non-inverting buffer/line driver with 3-State outputs. The device can be used as four 4-bit buffers, two 8-bit b

16-bit buffer/line driver with 30ohm termination resistor 3-State

DESCRIPTION The 74ALVCH162244 is a high-performance, low-power, low-voltage, Si-gate CMOS device, superior to most advanced CMOS compatible TTL families. The 74ALVCH162244 is a 16-bit non-inverting buffer/line driver with 3-State outputs. The device can be used as four 4-bit buffers, two 8-bit b

2.5V/3.3V 16-bit buffer/driver with 30ohm termination resistors 3-State

DESCRIPTION The 74ALVT162244 is a high-performance BiCMOS product designed for VCC operation at 2.5V or 3.3V with I/O compatibility up to 5V. FEATURES • 16-bit bus interface • 3-State buffers • 5V I/O compatibile • Output capability: +12mA/-12mA • TTL input and output switching levels

16-BIT BUFFERS/DRIVERS WITH 3-STATE OUTPUTS

文件：269.17 Kbytes Page：15 Pages