丝印代码：VSP5611；16-Bit, 4-Channel, CCD/CMOS Sensor Analog Front-End with Timing Generator

1FEATURES 23• Four-Channel CCD/CMOS Signal: 2-Channel, 3-Channel, and 4-Channel Selectable • Power Supply: 3.3 V Only, Typ (Built-in LDO, 3.3 V to 1.8 V) • Maximum Conversion Rate: – VSP5610: 35 MSPS – VSP5611: 50 MSPS – VSP5612: 70 MSPS • 16-Bit Resolution • CDS/SH Selectable • Maximum

丝印代码：VSP5611；16-Bit, 4-Channel, CCD/CMOS Sensor Analog Front-End with Timing Generator

1FEATURES 23• Four-Channel CCD/CMOS Signal: 2-Channel, 3-Channel, and 4-Channel Selectable • Power Supply: 3.3 V Only, Typ (Built-in LDO, 3.3 V to 1.8 V) • Maximum Conversion Rate: – VSP5610: 35 MSPS – VSP5611: 50 MSPS – VSP5612: 70 MSPS • 16-Bit Resolution • CDS/SH Selectable • Maximum

16-Bit, 4-Channel, CCD/CMOS Sensor Analog Front-End with Timing Generator

1FEATURES 23• Four-Channel CCD/CMOS Signal: 2-Channel, 3-Channel, and 4-Channel Selectable • Power Supply: 3.3 V Only, Typ (Built-in LDO, 3.3 V to 1.8 V) • Maximum Conversion Rate: – VSP5610: 35 MSPS – VSP5611: 50 MSPS – VSP5612: 70 MSPS • 16-Bit Resolution • CDS/SH Selectable • Maximum

16 位 50MSPS 4 通道成像模拟前端

VSP5610/11/12 为高速、高性能 16 位模数转换器 (ADC)，具有四个独立的采样电路通道，用于多路输出充电耦合设备 (CCD) 及互补金属氧化物半导体 (CMOS) 系列传感器。 传感器的像素数据由采样/保持 (SH) 或相关双采样 (CDS) 电路采样，然后由 ADC 转化为数字数据。 数据输出在低电压差动信号 (LVDS) 或 CMOS 模式下可选。\n VSP5610/11/12 包括一个可编程增益，支持亮度引起的像素级反射。 集成数模转换器 (DAC) 可用于调节模拟输入信号的偏移级别。 此外，定时发生器 (TG) 和一些控制传感器运行的器件集成。\n VSP5610/1 ·四通道 CCD/CMOS 信号：2 通道、4 通道或 4 通道（可选）\n ·电源： 仅限 3.3V（典型值）（内置 LDO，3.3V 至 1.8V）\n ·最大转换速率： ·VSP5610: 35 MSPS\n ·VSP5611: 50 MSPS\n ·VSP5612: 70 MSPS\n\n ·16 位分辨率\n ·CDS/SH（可选）\n ·最大输入信号范围：2.0V\n ·模拟和数字混合增益： ·模拟增益：3/64-V/V 步骤中为0.5V/V 至 3.5V/V\n ·数字增益：1/256-V/V 步骤中为1V/V 至 2V/V\n\n ·偏移校正 DAC：±250mV、8 位\n ;

16-Bit, 4-Channel, CCD/CMOS Sensor Analog Front-End with Timing Generator

文件：793.9 Kbytes Page：47 Pages

16-Bit, 4-Channel, CCD/CMOS Sensor Analog Front-End with Timing Generator

文件：793.9 Kbytes Page：47 Pages

封装/外壳：56-VFQFN 裸露焊盘 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：IC AFE 4 CHAN 16BIT 56VQFN 集成电路（IC） 模拟前端（AFE）

Multifunctional Voltage Regulator for TVs and VCRs

Features • Low saturation type of regulator (ON/OFF function built in) • Control amplifier built in. • Current limit and thermal limit circuits built in • Reverse current prevention provided (VO4) Applications • Audiovisual equipment, VCRs and TVs

PHOTOMULTlPLlER TUBES

PHOTOMULTlPLlER TUBES For Scintillation Counting, Ruggedized, Compact, 19mm (3/4 Inch) Diameter, Bialkali Photocathode, 10–stage, Head–On Type

1쨌3GHz Bidirectional I2C Bus Controlled Synthesiser

The SP5611 is a single chip frequency synthesiser designed for TV tuning systems. Control data is entered in the standard I2C BUS format. The device contains 4 addressable bidirectional open collector ports, one of which is a 3-bit ADC. The information on these ports can be read via the I2C BUS. t

1쨌3GHz Bidirectional I2C Bus Controlled Synthesiser

The SP5611 is a single chip frequency synthesiser designed for TV tuning systems. Control data is entered in the standard I2C BUS format. The device contains 4 addressable bidirectional open collector ports, one of which is a 3-bit ADC. The information on these ports can be read via the I2C BUS. t

18-Line 3-5 Volt SCSI Active Terminator, Reverse Disconnect

文件：254.93 Kbytes Page：5 Pages