11.5-12.5Gb/s 1:16 Demultiplexer with Clock Recovery

General Description The VCS8184 combines a clock recovery unit and data retiming with a 1:16 Demultiplexer on a single chip to directly generate 16-bit wide data from an incoming 11.5Gb/s to 12.5Gb/s data stream, for use in SONET STS-192/SDH STM-64 systems. Features: • Continuous 11.5 to 12.5Gb

11.5-12.5 Gb/s 1:16 demultiplexer with clock recovery

LOW-DROPOUT, 3 V REGULATOR . HIGH EFFICIENCY

Designed specifically to meet the requirement for extended operation of battery-powered equipment such as cordless and cellular telephones, the A8184SLT voltage regulator offers the reduced dropout voltage and quiescent current essential for maximum battery life. Applicable also to palmtop comput

Surface-Mount, Low Quiescent Current, Low Dropout Voltage Dropper Type

■ Features • Compact surface-mount package (equivalent to SOT-89) • Output current: 0.15A • Low circuit current Iq≤60µA (Output ON: VIN=6V, IO=0 to 0.1A) Iq(off)≤5µA(Output OFF: A8183SLU,A8186SLU) • Low dropout voltage: VDIF≤150mV (IO=60mA) • Output ON/OFF control terminal is compatib

LOW-DROPOUT, 3 V REGULATOR . HIGH EFFICIENCY

Designed specifically to meet the requirement for extended operation of battery-powered equipment such as cordless and cellular telephones, the A8184SLT voltage regulator offers the reduced dropout voltage and quiescent current essential for maximum battery life. Applicable also to palmtop comput

700 MHz, 5 mA 4-to-1 Video Multiplexer

PRODUCT DESCRIPTION The AD8184 is a high speed 4-to-1 multiplexer. It offers –3 dB signal bandwidth of 700 MHz along with a slew rate of 750 V/µs. With 95 dB of crosstalk and 115 dB isolation, it is useful in many high speed applications. The differential gain and differential phase error of 0.01

700 MHz, 5 mA 4-to-1 Video Multiplexer

PRODUCT DESCRIPTION The AD8184 is a high speed 4-to-1 multiplexer. It offers –3 dB signal bandwidth of 700 MHz along with a slew rate of 750 V/µs. With 95 dB of crosstalk and 115 dB isolation, it is useful in many high speed applications. The differential gain and differential phase error of 0.01