Hex Port Bypass Circuit / Dual Repeater for 1.0625 Gb/s FC-AL Disk Arrays

General Description The VSC7128 contains six Port Bypass Circuits (PBCs), dual embedded Clock Recovery Unit repeaters (CRU) and dual Signal Detect Units (SDU). These functions are integrated into a single part to minimize circuit size, part count, cost, high frequency routing and jitter accumulat

Hex port bypass circuit/dual repeater for 1.0625 Gb/s FC-AL disk arrays. 3.3 supply, 1.3W

5 x 7-Dot Character x 16-Digit Display Controller/Driver

GENERAL DESCRIPTION The MSC7128-xx is a general purpose display controller for vacuum fluorescent display tube. The MSC7128-xx drives displays with up to 35 anodes (dots) and up to 16 grids (characters) plus a cursor. The controller accepts command and display data input words on a clocked seri

5 x 7-Dot Character x 16-Digit Display Controller/Driver

GENERAL DESCRIPTION The MSC7128-xx is a general purpose display controller for vacuum fluorescent display tube. The MSC7128-xx drives displays with up to 35 anodes (dots) and up to 16 grids (characters) plus a cursor. The controller accepts command and display data input words on a clocked seri

Integrated Circuit Positive Voltage Regulator with ON/OFF Feature, 12V, 1A

Description: The NTE7128 is a 1A low power–loss voltage regulator in a 4–Lead TO220 type package designed for use in constant voltage power applications in electronic equipment such as VCRs and musical instruments. Features: ● Low Power Loss ● Includes ON/OFF Control Terminal ● Precision Outp

Digital video encoder

GENERAL DESCRIPTION The SAA7128H; SAA7129H encodes digital CB-Y-CR video data to an NTSC, PAL or SECAM CVBS or S-video signal. Simultaneously, RGB or bypassed but interpolated CB-Y-CR signals are available via three additional DACs. FEATURES • Monolithic CMOS 3.3 V device, 5 V I2C-bus optional

Digital video encoder

GENERAL DESCRIPTION The SAA7128H; SAA7129H encodes digital CB-Y-CR video data to an NTSC, PAL or SECAM CVBS or S-video signal. Simultaneously, RGB or bypassed but interpolated CB-Y-CR signals are available via three additional DACs. FEATURES • Monolithic CMOS 3.3 V device, 5 V I2C-bus optional