NTSC/PAL Digital Video Encoder

The VP5311/VP5511 converts digital Y, Cr, Cb, data into analog NTSC/PAL composite video and S-video signals. The outputs are capable of driving doubly terminated 75 ohm loads with standard video levels. The device accepts data inputs complying with CCIR Recommendation 601 and 656. The data is tim

2.5 V to 5.5 V, 500 uA, Parallel Interface Quad Voltage-Output 8-/10-/12-Bit DACs

GENERAL DESCRIPTION The AD5334/AD5335/AD5336/AD5344 are quad 8-, 10-, and 12-bit DACs. They operate from a 2.5 V to 5.5 V supply consuming just 500 µA at 3 V, and feature a power-down mode that further reduces the current to 80 nA. These devices incorporate an on-chip output buffer that can drive

Power supply unit for LCD drives

Power supply unit for LCD drives The BP5311 is a DC-DC converter unit for supplying power to liquid crystal display (LCD) panels. The unit supplies a positive voltage for LCDs from a logic circuit power supply (+5V) Features 1) High conversion efficiency. 2) Built-in protection circuit. 3) Bu

Variable Drivided Voltage Generator for LCD

Overview The LA5311M is a variable divided voltage generator IC for multiple drive of LCD matrix. Features • Power supply for variable bias LCD drive. • 4 operational amplifiers deliver 4 voltage outputs. • Low current drain (1.0mA max). • Miniflat package.

Dual Bias Resistor Transistors

Dual Bias Resistor Transistors NPN and PNP Silicon Surface Mount Transistors with Monolithic Bias Resistor Network The BRT (Bias Resistor Transistor) contains a single transistor with a monolithic bias network consisting of two resistors; a series base resistor and a base–emitter resistor. Thes

Single Phase Bridge Rectifier 4 Amp

Features: ● Ideal for Printed Circuit Board ● Surge Overload Rating: 200A (Peak)