Serial Instrument Control Interfaces for USB

文件：99.25 Kbytes Page：2 Pages

USB to RS232 TTL

TAA Compliant. • Provides 1 TTL/CMOS RS232 Serial Port over USB Port. • Supports 3-Signal TTL/CMOS RS232 Conversion: (TXD, RXD, GND). • Supports a 5-pin Terminal Blocks for TTL/COMS Signal Wiring. • 5V/3.3V/2.5V/1.8V Logic Level Selectable by DIP Switch. • Signal Levels are Similar to Standar

USB to RS232 Isolated TTL

Provides 1 TTL/CMOS RS232 Serial Port over USB Port • Supports 3-Signal TTL/CMOS RS232 Conversion: (TXD, RXD, GND) • Supports a 5-pin Terminal Blocks for TTL/COMS Signal Wiring • 5V/3.3V Logic Level Selectable by DIP Switch • Signal Levels are Similar to Standard RS232 but in TTL/CMOS Swing Le

VERY HIGHSPEED, ULTRA LOWPOWERCONSUMPTION 5V POWERED RS-232 DRIVERS AND RECEIVERS

Description The ST232A is a 2 driver, 2 receiver device following EIA/TIA-232 and V.28 communication standard. It is particularly suitable for applications where ±12V is not available. The ST232A uses a single 5V power supply and only four external capacitors (0.1µF). Typical applications are i

5V POWERED MULTI-CHANNEL RS-232 DRIVERS AND RECEIVERS

DESCRIPTION The ST232 is a 2 driver, 2 receiver device following EIA/TIA-232 and V.28 communication standard. It is particularly suitable for applications where ±12V is not available. The ST232 uses a single 5V power supply and only four external capacitors (0.1µF). Typical applications are in:

5V POWERED MULTI-CHANNEL RS-232 DRIVERS AND RECEIVERS

DESCRIPTION The ST232 is a 2 driver, 2 receiver device following EIA/TIA-232 and V.28 communication standard. It is particularly suitable for applications where ±12V is not available. The ST232 uses a single 5V power supply and only four external capacitors (0.1µF). Typical applications are in:

5V POWERED MULTI-CHANNEL RS-232 DRIVERS AND RECEIVERS

DESCRIPTION The ST232 is a 2 driver, 2 receiver device following EIA/TIA-232 and V.28 communication standard. It is particularly suitable for applications where ±12V is not available. The ST232 uses a single 5V power supply and only four external capacitors (0.1µF). Typical applications are in:

5V POWERED MULTI-CHANNEL RS-232 DRIVERS AND RECEIVERS

DESCRIPTION The ST232 is a 2 driver, 2 receiver device following EIA/TIA-232 and V.28 communication standard. It is particularly suitable for applications where ±12V is not available. The ST232 uses a single 5V power supply and only four external capacitors (0.1µF). Typical applications are in: