PIN DIODE

DESCRIPTION UM2100 Series PIN diodes are designed for transmit/receive switch and attenuator applications in HF band (2-30MHz) and below. As series configured switches, these long lifetime (25μs typical) diodes can control up to 2.5 kW, CW in a 50 ohm system. In HF band, insertion loss is less

ATTENUATOR AND POWER PIN DIODES 2 ??30 MHz

文件：299.03 Kbytes Page：6 Pages

Camera Signal ProcessingCDS AGC Gamma

■ Overview The AN2108NFHQ is a single-chip IC that processes video-signal of CCD-camera and has functions of CDS, AGC, pre-knee and pre-aperture circuits. This CDS circuit is capable of high speed sampling of max. 30 MHz to support high-resolution CCD-camera systems (XGA, SXGA, etc.). AGC and OB

single-chip voice synthesizing CMOS IC

GENERAL DESCRIPTION: The AVH308 , AV0708 , AV1408 and AV2108 are single-chip voice synthesizing CMOS IC. They are low cost with proper functions and can synthesize voice up to 3.5, 7, 14 and 21 seconds, using Aplus 4-bit LOGPCM algorithm. Customer speech data can be programmed into ROM by changin

Constant-Current Driver for Full Color LED Display

Description The CXA2108Q is a 1,024-gradation LED driver which is ideal for full color LED displays. This IC has 24 outputs and a maximum output current of 60mA. Time division allows driving of either two or six LEDs per output by connecting an external FET or other switch. The luminance (PWM) an

Constant-Current Driver for Full Color LED Display

Description The CXA2108AQ is a 1,024-gradation LED driver which is ideal for full color LED displays. This IC has 24 outputs and a maximum output current of 70mA. Time division allows driving of either two or six LEDs per output by connecting an external FET or other switch. The luminance (PWM) a

Constant-Current Driver for Full Color LED Display

Description The CXA2108Q is a 1,024-gradation LED driver which is ideal for full color LED displays. This IC has 24 outputs and a maximum output current of 60mA. Time division allows driving of either two or six LEDs per output by connecting an external FET or other switch. The luminance (PWM) an