UCC5714x High-Speed, Low-Side Gate Driver With Overcurrent Protection

1 Features • Typical 3A sink 3A source output currents • -250mV over current protection (OCP) threshold • Single pin for fault output and enable • Programmable fault clear time and over current detection response time • Absolute maximum VDD voltage: 30V • Tight UVLO threshold for bias flexi

UCC5714x-Q1 High-Speed, Low-Side Gate Drivers With Overcurrent Protection for Automotive Applications

1 Features • Qualified for Automotive Applications • AEC-Q100 Qualified – Device Temperature Grade 1 • Typical 3A sink 3A source output currents • -250mV over current protection (OCP) threshold • Single pin for fault output and enable • Programmable fault clear time and over current detect

具有过流保护和 12V 欠压锁定 (UVLO) 功能的 3A 低侧驱动器

The UCC5714x is a single channel, high-performance, low-side gate driver capable of effectively driving MOSFET, IGBT and SiC power switches. The UCC5714x has a typical peak drive strength of 3A. \n\nThe UCC5714x provides the over current protection with the OCP pin. When the over current signal is d • Typical 3A sink 3A source output currents\n• Single pin for fault output and enable\n• Absolute maximum VDD voltage: 30V\n• Typical 26ns propagation delay\n• Available in 2.9mm x 1.6mm SOT-23 package\n• Operating junction temperature range of –40°C to 150°C;

丝印代码：U142；UCC5714x High-Speed, Low-Side Gate Driver With Overcurrent Protection

1 Features • Typical 3A sink 3A source output currents • -250mV over current protection (OCP) threshold • Single pin for fault output and enable • Programmable fault clear time and over current detection response time • Absolute maximum VDD voltage: 30V • Tight UVLO threshold for bias flexi

丝印代码：U42Q；UCC5714x-Q1 High-Speed, Low-Side Gate Drivers With Overcurrent Protection for Automotive Applications

1 Features • Qualified for Automotive Applications • AEC-Q100 Qualified – Device Temperature Grade 1 • Typical 3A sink 3A source output currents • -250mV over current protection (OCP) threshold • Single pin for fault output and enable • Programmable fault clear time and over current detect

UCC5714x-Q1 High-Speed, Low-Side Gate Drivers With Overcurrent Protection for Automotive Applications

1 Features • Qualified for Automotive Applications • AEC-Q100 Qualified – Device Temperature Grade 1 • Typical 3A sink 3A source output currents • -250mV over current protection (OCP) threshold • Single pin for fault output and enable • Programmable fault clear time and over current detect

Magnets and Actuators

Description Littelfuse offers a wide range of magnetic actuators that are packaged in shapes similar to the relative mating sensors. We also offer a limited family of bare magnets with various grades of materials, including ferrite (ceramic), AlNiCo and neodymium iron boron (NdFeB) materials.