Features

■The tags must undergo adequate stress

tests within the proposed temperature

processes before deployment.

■The following stress test was performed on

this tag:

Cyclic temperature stress: 5 min at -40 °C –

5 min at 90 °C

Number of tested cycles: 100, transition

period: 30 seconds

Continuous load: 140 °C for 100 hours

■This successfully performed test does not

imply suitability for a specific application,

but merely serves as proof of the basic

usability.

■EEPROM, memory 128 byte

■Not for direct mounting on metal

Functional principle

The HF read/write devices operating at a

frequency of 13.56 MHz form a transmission

zone the size of which (0…500 mm) varies,

depending on the combination of read/write

head and tag used.

The read/write distances mentioned here only

represent standard values measured under

laboratory conditions, free from any influences

caused by surrounding materials.

The read/write distances of tags suitable for

mounting in/on metal were determined in/on

metal.

Attainable distances may vary by up to 30

due to component tolerances, mounting

conditions, ambient conditions and material

qualities (especially when mounted in metal).

Testing of the application under real operating

conditions is therefore essential, especially

with on-the-fly reading and writing!