The cabinet guard IM18-CCM60-MTI/24VDC

uses integrated sensors to monitor temperature, relative humidity and the distance from

the control cabinet door. The information can

be transferred to higher-level systems via the

Ethernet interface, for example.

The following interfaces are provided on the

device:

■ Two Ethernet interfaces

■ CAN/RS485 interface

■ Two GPIOs

■ Two analog inputs (configurable as current

or voltage input)

■ Changeover contact relay

■ USB interface

The device can be accessed via the webbased SIINEOS Management Console

(SMAC) using a Micro USB connection or an

Ethernet connection. This enables the smart

preprocessing of data through the use of integrated applications. In addition, the device

functions can be programmed as required.

To save space, the narrow, 18-mm housings

can be easily mounted in any control cabinet

on a DIN rail in accordance with EN 60715.

The device is equipped with removable

spring-type terminals.

Product from laser class 1: The device complies with standards 21 CFR 1040.10 and

1040.11 with the exception of IEC 60825-1

Ed. 3, as described in Laser Notice No. 56 of

May 8, 2019.

■ Microprocessor: AM3358BZCZA100 (TI

Sitara 32-bit ARM Cortex-A8)

■ RAM: 8 Gbit 1 GB DDR3L

■ Flash: 8 GB eMMC

■ Interfaces:

■ 1 × 1-Gbit Ethernet

■ 1 × 100-Mbit Ethernet

■ 1 × CAN/RS485

■ 2 × digital inputs or outputs

■ 2 × analog inputs

■ 1 × relay

■ Temperature detection

■ Moisture detection

■ Proximity detection

■ Supply voltage 24 VDC

■ DIN rail mounting

■ SIINEOS software

■ Micro USB