Features

■Rectangular, plastic, Ultem

■Status displayed via LED

■Angle detection along two axes with ±85 °

measuring range

■Temperature detection from -40 °C to 85 °C

■High protection class IP68/IP69K

■Protected against salt spray and rapid

temperature change

■18…30 VDC

■M12 × 1 connector, 4-pin

■Communication via IO-Link

Functional principle

The inclinometers use an acceleration

measuring cell to determine the angle. The

Earth's gravity is used as a reference. If the

inclinometer changes its angle relative to

the Earth's gravity, this is detected by the

acceleration measuring cell. The signal is then

linearized so that a value proportional to the

angle is output.

The measuring principle used makes mounting

and commissioning the device easy. The robust

sensors are positioned with the cast side on

a flat surface so that the casting compound is

covered. The sensor is then secured with two

screws.

The sensor can also record the temperature,

which can be used to monitor the condition of

the machine