The 2-channel temperature measuring amplifier IMX12-TI01-2RTDR-2I-C0/24VDC/CC

has inputs for: RTDs acc. to IEC 60751, DIN

43760, GOST 6651-94 (2, 3 and 4-wire) and

resistors 0…5 kò (2, 3 and 4-wire).

The device is configured via the PC interface.

The current outputs can be set to 0/4 … 20

mA and as source or sink.

A green LED indicates operational readiness.

A fault in the input circuit leads to a flashing

red LED according to NE44, an internal error

to a steady red LED. The fault current can be

adjusted to 21.5 mA.

The device can be used in safety circuits up to

SIL2 (high and low demand according to IEC

61508) and meets the requirements of NE21.

It is equipped with removable spring type terminals.

The device is equipped with removable

spring-type terminals.

■ Input circuits monitored for wire-break and

short-circuit

■ Parameterized via PC

■ Complete galvanic isolation

■ Input reverse-polarity protected

■ Removable spring type terminals

■ ATEX, IECEx, cFM,cUL, NEPSI, INMETRO, Kosha, TR CU EAC CMI

■ Installation in zone 2

■ SIL 2