1 Features

• AEC-Q100 qualified for automotive applications

• Supports DC shifts up to ±80V

• AC Noise Rejection of 140VPP up to 1MHz

• CMTI of 250V/μs

• Low Prop Delay (<5ns) and Ch-Ch Skew (<0.20ns)

• Greater than 250Mbps

• Low power consumption (0.8mA per channel at

1Mbps, 1.8V)

• Fully configurable dual-rail design allows each port

to operate from 1.71V to 5.5V

• 4, 2, 1 channel devices with multiple configurations

will be available

• Two device variants:

– TXG8020-Q1: 2 forward

– TXG8021-Q1: 1 forward, 1 reverse

• Supports VCC disconnect feature (I/Os are forced

into high-Z)

• Schmitt-trigger inputs allows for slow and noisy

signals

• Inputs with integrated static pull-down resistors

prevent channels from floating

• Operating temperature from –40°C to +125°C

• Latch-up performance exceeds 100mA per JESD

78, class II

– ESD protection exceeds JESD 22

– 4000V human-body model

– 500V charged-device model

• Package options provided:

– DSG (WSON-8)

– DDF (SOT-8)

– D (SOIC-8)

2 Applications

• Electric Power Steering

• Vehicle Control Unit

• Automotive Display

• Head Unit and Digital Cockpit

3 Description

The TXG802x-Q1 is a 2-bit, fixed direction, nongalvanic

based voltage and ground-level translator

that can support both logic-level shifting between

1.71V to 5.5V and ground-level shifting up to

±80V. Compared to traditional level shifters, the

TXG802x-Q1 family can solve the challenges of

voltage translation across different ground levels. The

Simplified Diagram shows a common use case where

DC shift occurs between GNDA to GNDB due to

parasitic resistance or capacitance.

VCCA is referenced to GNDA and VCCB is referenced

to GNDB. Ax pins are referenced to VCCA logic level

while Bx pins are referenced to VCCB logic levels.

Both A port and B port can accept voltages from

1.71V to 5.5V. The leakage between GNDA and

GNDB is <2μA when VCC to GND is shorted.

The TXG802x-Q1 device helps improve noise

immunity and power sequencing across different

ground domains while providing low power

consumption, latency and channel-to-channel skew.

It can supress noise levels of 140VPP up to

1MHz (Figure 7-4). This device can support multiple

interfaces such as UART, GPIO, and JTAG.