1 Features

• VCC operation of 2.3V to 3.6V

• Switch I/OS accept signals up to 5.5V

• 1.8V compatible control-pin inputs

• Low-power mode when OE is disabled (1μA)

• rON = 6Ω maximum

• ΔrON = 0.2Ω typical

• CIO(ON) = 7pf maximum

• Low power consumption (30μA maximum)

• ESD performance tested:

– 7000V human body model per JEDEC JS-001

– 1000V charged-device model per JEDEC

JS-002

• ESD performance I/O port to GND:

– 12kV human body model (JEDEC JS-001)

– ±7kV contact discharge (IEC 61000-4-2)

• High bandwidth (1GHz typical)

2 Applications

• Routes signals for USB 1.0, 1.1, and 2.0

• Mobile phones

• Digital cameras

• Notebooks

• USB I/O expansion

• MHL 1.0

3 Description

The TS3USB221E is a high-bandwidth switch

specially designed for the switching of high-speed

USB 2.0 signals in handset and consumer

applications, such as cell phones, digital cameras,

and notebooks with hubs or controllers with limited

USB I/Os. The wide bandwidth (1GHz) of this switch

allows signals to pass with minimum edge and phase

distortion. The device multiplexes differential outputs

from a USB host device to one of two corresponding

outputs. The switch is bidirectional and offers little

or no attenuation of the high-speed signals at the

outputs. The TS3USB221E is designed for low bit-tobit

skew and high channel-to-channel noise isolation,

and is compatible with various standards, such as

high-speed USB 2.0 (480Mbps).

The TS3USB221E integrates ESD protection cells on

all pins, is available in a SON package (3mm ×

3mm) as well as in a tiny μQFN package (2mm

× 1.5mm) and is characterized over the free-air

temperature range from –40°C to 85°C.