FEATURES

· 1-W BTL Output (5 V, 0.2 % THD+N)

· 3.3-V and 5-V Operation

· No Output Coupling Capacitors Required

· Shutdown Control (IDD = 0.6 μA)

· Headphone Interface Logic

· Uncompensated Gains of 2 to 20 (BTL Mode)

· Surface-Mount Packaging

· Thermal and Short-Circuit Protection

· High Power Supply Rejection(56-dB at 1 kHz)

· LM4860 Drop-In Compatible

DESCRIPTION

The TPA4860 is a bridge-tied load (BTL) audio power amplifier capable of delivering 1 W of continuous average

power into an 8-W load at 0.4 % THD+N from a 5-V power supply in voiceband frequencies (f < 5 kHz). A BTL

configuration eliminates the need for external coupling capacitors on the output in most applications. Gain is

externally configured by means of two resistors and does not require compensation for settings of 2 to 20.

Features of this amplifier are a shutdown function for power-sensitive applications as well as headphone

interface logic that mutes the output when the speaker drive is not required. Internal thermal and short-circuit

protection increases device reliability. It also includes headphone interface logic circuitry to facilitate headphone

applications. The amplifier is available in a 16-pin SOIC surface-mount package that reduces board space and

facilitates automated assembly.