1 Features

• AEC-Q100 qualified for automotive applications:

– Device temperature grade 1: –40°C to +125°C,

TA

– Device HBM ESD classification level 2

– Device CDM ESD classification level C4B

• Functional Safety-Capable:

– Documentation available to aid functional safety

system design

• Full array local dimming topology:

– Support up to 1024 devices cascaded

• Operating voltage VCC range: 3 V to 5.5 V

• Flexible P-MOSFET driving options:

– Maximum channel current / voltage:

• 30 mA / 20 V: TLC69600-Q1

• 60 mA / 20 V: TLC69610-Q1

• 30 mA / 50 V: TLC69650-Q1

• 60 mA / 50 V: TLC69660-Q1

– Global 8-bit Maximum Current (MC) setting

– Individual 8-bit Channel Current (CC) setting

• High speed daisy chain interface:

– I/O voltage compatible with: 1.8 V / 3.3 V

– Data transfer rate: up to 20 MHz

• EMI enhancement:

– Programmable interface driving capability

• Diagnostics:

– Device thermal shutdown detection

– Report interface option:

• UART and interrupt pin (INT)

• Two-wire output: CLK_O and SOUT

2 Applications

• LCD local dimming backlight:

– Automotive Central Information Display

– Automotive Cluster Display

– Automotive Head-up Display

3 Description

TLC696x0-Q1 is a scan MOSFET controller

compatible with current-sink driver TLC696x2/4/8-Q1

to achieve 2/4/8 time-multiplexing control. Each

device integrates with 16 constant current sinks for

up to 8 scan MOSFETs control. The device equips

with ghost-cancellation function to eliminate upside

ghosting.

To optimize system efficiency, the device is equipped

with adaptive headroom voltage control scheme to

directly control DC/DC. Only the FB pin from last

device in serial chain should be connected to DC/DC

to achieve simplified system layout. The device also

integrates minimum brightness update latency, black

insertion and VRR features to improve display quality.

TLC696x0-Q1 has three error flags: LED open

detection (LOD), LED short detection (LSD) and

thermal shutdown detection (TSD) for diagnostic. The

device implements two options for readback including

UART/INT and SOUT/CLK_O which is programmable

by register.