Description

- Passive infra-red presence detector KNX for flush-mounted ceiling installation

- Square detection area 360°, 7 x 7 m, (49 m2) at mounting height 3 m

- 2 channels light and 2 channels presence

- 2 channel light C1, C2 with 1 light measurement

- 2 presence channels C4, C5 can be set individually

- Adaptable 1 channel light measurement

- Mixed light measurement suitable for LEDs, fluorescent lamps (FL/PL/ESL) and halogen/incandescent lamps

- Can be used as fully or semi-automatic, switchable

- Switch or constant light control mode with stand-by function

- Dimmable lighting in switch mode with stand-by function

- Brightness switching value or set point value can be set in lux using parameters, on the device itself or via remote control

- Teaching in of the brightness switching value or the set point value

- Room correction factor setting for brightness measurement calibration

- Light time delay can be set using parameters, on the device itself or via remote control

- Switch on delay and time delay for presence can be set

- Detection sensitivity can be set

- Self-learning time delay

- Reduced time delay in the event of a shorter stay in the room (short presence)

- Scenario functions

- Extremely easy setting of energy saving characteristics with the new eco plus function

- Test mode for checking function and detection range

- Parallel switching of several detectors in Master/Slave or Master/Master possible

- User remote control and management-remote control (optional)

- Room monitoring

- * According to warranty terms and conditions, see www.theben.de/en/guarantee