Application Information

The TXMC889 is a Switched Mezzanine Card (XMC)

compatible module providing a four channel Gigabit

Ethernet Small Form Factor Pluggable (SFP) interface.

The XMC-Connector P15 provides access to the Intel™

I350-AM4 quad port Gigabit Ethernet controller via an x4

PCIe link.

The TXMC889's SFP Cages accept various SFP

transceiver modules. These four SFP hosts are connected

to the Ethernet Controller's SerDes Interfaces.

The following transceiver modules have been successfully

tested with the TXMC889:

 Intel XDACBL1M

(SFP+ Direct Attach Twinaxial Cable)

 Finisar FCBG110SD1C01

(SFP+ SFPwire Active Optical Cable)

 Intel E10GSFPSR

(SFP+ 1000BASE-SX)

 Finisar FTLX8574D3BCV

(SFP+ 1000BASE-SX)

 Intel E10GSFPLR

(SFP+ 1000BASE-LX)

 Finisar FTLX1475D3BCV

(SFP+ 1000BASE-LX)

 Finisar FTLF8519P3BTL

(SFP 1000BASE-SX)

 Finisar FTLF1318P3BTL

(SFP 1000BASE-LX)

 Finisar FCLF8522P2BTL

(SFP 1000BASE-T)

All compatible transceivers modules and replacements of

the tested modules will also work properly with the

TXMC889.

The controller is equipped with a 32 Mbit serial flash

memory for Boot ROM and a 128 Kbit EEPROM storing

configuration data. LEDs in the front panel indicate the

different network activities.

For preconfigured variants of the hardware module

containing transceiver modules, please contact TEWS.

The TXMC889-10R provides four Gigabit Ethernet

Interfaces via front panel SFP connectors.

Software support:

o Software support for Intel™ I350 at www.intel.com

o For operating systems not supported by Intel™,

please contact TEWS.