Application Information

The TIP710 is an IndustryPack® compatible module providing 16 digital outputs configured as high side switch with galvanic isolation via optocouplers.

The TIP710 directly controls up to 16 lines of all kinds of resistive, capacitive and inductive loads.

The outputs are capable of driving 1A continuous per channel at an external supply voltage of 6V to 48V.

All outputs resist short-circuits and are protected against thermal overload.

After power-on or reset all channels are in the off state. A hardware watchdog clears all outputs in case of trigger failure.

Software Support (TIP710-SW-xx) is available for different operating systems.