The 9x60A-DST is a bench-top, 2U, half 19 rack size,

fully metal case, single or dual channel DC coupled

wideband amplifier designed for high frequency, high

current, signal amplification. While target applications

include piezo-electronics, transducer characterization,

MEMS, general electronics and scientific applications,

with a high bandwidth of 45MHz, 34Vp-p into 50 ohms

and up to 10W output power and a peak output current

of 1A, the 9x60A-DST is the ideal complimentary

amplifier to any signal source that needs a supporting

power boost for demanding applications.

Instrument Configuration

The 9x60A-DST can be configured to be used

as two, single-ended independent channels,

or as a one input with two differential outputs.

The 9x60A's standard configuration enables

a maximum output voltage of 34Vp-p into 50

ohms with a gain of x10. Other custom gain,

such as x15 can be ordered at the time of the

purchase, enabling clients’ even wider variety

of choices to solve their application.

Input Characteristics

There are three inputs for each channel:

1. Main input, which is located on the front panel

and is normally used for signal inputs.

2. Auxiliary input, which is located on the rear

panel and can be used as a summing input.

3.DC Offset input, which is located on the rear

panel and can be used for offsetting signal

level within the specified output level window.

Output Characteristics

The outputs are located on the front panel. There

are two outputs, one for each channel. When

the 9x60A-DST is configured as two separate

amplifiers, the outputs generate amplified signals

within the range of 34Vp-p into matching load

impedance at approximately 45MHz bandwidth.

Auxiliaries

The 9x60A-DST has two additional inputs

for each channel allowing summation of two

signals and providing an external control of DC

level offset. These inputs are accessible from

the rear panel only.