High bandwidth (52 MHz), rail-to-rail output, 36 V op amp

Features • Low offset voltage: 3 mV max @ 25 °C • Low current consumption: 3.3 mA max / op @ 36 V • Wide supply voltage: 4.5 to 36 V • Gain bandwidth product: 52 MHz typ. @ 36 V • Unity gain stable • Rail-to-rail output • Output current: 40 mA typ. @ 36 V • Input common-mode voltage includ

High bandwidth (52 MHz), rail-to-rail output, 36 V op amp

TSB952是一款高速双运算放大器，提供了扩展的电源电压工作范围和轨到轨输出。得益于52 MHz的增益带宽积，该器件还具有出色的速度/电流消耗比， 每个通道在36 V的电压下消耗的电流低于3.3 mA。\n\n TSB952的工作温度范围宽泛（从-40 °C到125 °C）且具有相关资质，是工业和汽车应用的理想选择。\n\n 由于封装尺寸较小，TSB952可以用于板上空间有限的应用。这可以降低PCB的总体成本。\n\n • 低偏移电压：在25 °C时最高3 mV \n• 宽电源电压：4.5至36 V \n• 单位增益稳定 \n• 输出电流：36 V时的典型值为40 mA• 输入共模电压包括接地 \n• 抗EMI干扰 \n• 汽车认证 \n• 微型封装：SO8、DFN8 3x3可湿性侧面;

丝印代码：TSB951I；High bandwidth (52 MHz), rail-to-rail output, 36 V op amp

Features • Low offset voltage: 3 mV max @ 25 °C • Low current consumption: 3.3 mA max / op @ 36 V • Wide supply voltage: 4.5 to 36 V • Gain bandwidth product: 52 MHz typ. @ 36 V • Unity gain stable • Rail-to-rail output • Output current: 40 mA typ. @ 36 V • Input common-mode voltage includ

丝印代码：TSB951IY；High bandwidth (52 MHz), rail-to-rail output, 36 V op amp

Features • Low offset voltage: 3 mV max @ 25 °C • Low current consumption: 3.3 mA max / op @ 36 V • Wide supply voltage: 4.5 to 36 V • Gain bandwidth product: 52 MHz typ. @ 36 V • Unity gain stable • Rail-to-rail output • Output current: 40 mA typ. @ 36 V • Input common-mode voltage includ

丝印代码：K247；High bandwidth (52 MHz), rail-to-rail output, 36 V op amp

Features • Low offset voltage: 3 mV max @ 25 °C • Low current consumption: 3.3 mA max / op @ 36 V • Wide supply voltage: 4.5 to 36 V • Gain bandwidth product: 52 MHz typ. @ 36 V • Unity gain stable • Rail-to-rail output • Output current: 40 mA typ. @ 36 V • Input common-mode voltage includ

丝印代码：K248；High bandwidth (52 MHz), rail-to-rail output, 36 V op amp

Features • Low offset voltage: 3 mV max @ 25 °C • Low current consumption: 3.3 mA max / op @ 36 V • Wide supply voltage: 4.5 to 36 V • Gain bandwidth product: 52 MHz typ. @ 36 V • Unity gain stable • Rail-to-rail output • Output current: 40 mA typ. @ 36 V • Input common-mode voltage includ

LOW VOLTAGE PLL CLOCK DRIVER

Low Voltage PLL Clock Driver The MPC950/951 are 3.3V compatible, PLL based clock driver devices targeted for high performance clock tree designs. With output frequencies of up to 180MHz and output skews of 375ps the MPC950 is ideal for the most demanding clock tree designs. The devices employ a f

Integrated Circuit Positive 3 Terminal Voltage Regulator, 100mA

Description: The NTE950, NTE951, and NTE977 are positive 3–terminal voltage regulators in available in a TO92 type package. With adequate heat sinking these regulators can deliver 100mA output current. Current limiting is included to limit peak output current to safe value. Safe area protection

UHF wideband transistor

DESCRIPTION Silicon NPN transistor in a surface mount 3-pin SOT23 package. The transistor is primarily intended for wideband applications in the GHz-range in the RF front end of analog and digital cellular telephones, cordless phones, radar detectors, pagers and satellite TV-tuners. FEATURES •

INPUT/OUTPUT RAIL TO RAIL LOW POWER OPERATIONAL AMPLIFIERS

Description The TS95x family are rail-to-rail BiCMOS operational amplifiers optimized and fully specified for 3V and 5V operation. The TS951 is housed in the space-saving 5 pins SOT23 package that makes it well suited for battery-powered systems. This micropackage simplifies the PC board design

INPUT/OUTPUT RAIL TO RAIL LOW POWER OPERATIONAL AMPLIFIERS

Description The TS95x family are rail-to-rail BiCMOS operational amplifiers optimized and fully specified for 3V and 5V operation. The TS951 is housed in the space-saving 5 pins SOT23 package that makes it well suited for battery-powered systems. This micropackage simplifies the PC board design