OUTPUT RAIL TO RAIL MICROPOWER OPERATIONAL AMPLIFIERS

DESCRIPTION The TS93x (Single, Dual & Quad) is Operational Amplifier able to operate with voltage as low as 2.7V and to reach 2.9Vpp of output swing with RL = 100kΩ when supplied @ 3V. Offering a typical consumption of only 20µA, it is particularly well-suited for every kind of battery-suppli

Micropower amplifier with CMOS inputs

The TS93x (single, dual and quad) series are operational amplifiers that can operate with voltages as low as 2.7 V and reach a 2.9 Vpp output swing with RL = 100 kΩ when supplied at 3 V.\nOffering a typical consumption of only 20 μA, these devices are particularly well suited to battery powered appl Rail-to-rail output voltage swing\nMicropower consumption (20 μA)\nSingle supply operation (2.7 to 10 V)\nLow offset (2 mV max. for TS93xB)\nCMOS inputs\nUltra low input bias current (1 pA)\nESD protection (2 kV)\nLatch-up immunity (class A)\nAvailable in SO-8, SO-14, SOT23-5, and TSSOP-14 package\n;

OUTPUT RAIL TO RAIL MICROPOWER OPERATIONAL AMPLIFIERS

文件：242.58 Kbytes Page：15 Pages

OUTPUT RAIL TO RAIL MICROPOWER OPERATIONAL AMPLIFIERS

文件：242.58 Kbytes Page：15 Pages

32 W 890 to 915 MHz RF POWER AMPLIFIER

The RF Line UHF Power Amplifier . . . designed specifically for the Pan European digital 20 watt, GSM mobile radio. The MHW932 is capable of wide power range control, operates from a 12.5 volt supply and requires 100 mW of RF input power. • Specified 12.5 Volt Characteristics: RF Input Pow

LOW VOLTAGE PLL CLOCK DRIVER

Low Voltage PLL Clock Driver The MPC932 is a 3.3V compatible PLL based clock driver device targetted for zero delay applications. The device provides 6 outputs for driving clock loads plus a single dedicated PLL feedback clock output. The dedicated feedback output gives the user six choices of in

1.8V, RRIO Operational Amplifiers

文件：625.77 Kbytes Page：19 Pages

1.8V, RRIO Operational Amplifiers

文件：625.77 Kbytes Page：19 Pages

1.8V, RRIO Operational Amplifiers

文件：625.77 Kbytes Page：19 Pages