1.2 W fully differential audio power amplifier with selectable standby and 6 dB fixed gain

Description The TS4995 is an audio power amplifier capable of delivering 1.2 W of continuous RMS output power into an 8 Ω load at 5 V. Thanks to its differential inputs, it exhibits outstanding noise immunity. Features ■ Differential inputs ■ 90 dB PSRR @ 217 Hz with grounded inputs ■ Operate

1.2W全差分音频功率放大器，支持可选待机和6db固定增益

The TS4995 is an audio power amplifier capable of delivering 1.2 W of continuous RMS output power into an 8 Ω load at 5 V. Thanks to its differential inputs, it exhibits outstanding noise immunity.\n\n An external standby mode control reduces the supply current to less than 10 nA. A STBY MODE pin al • Ultra-low pops and click \n• Available in 9-bump flip chip (300mm bump diameter) \n• Selectable standby mode (active low or active high) \n• Ultra-low consumption in standby mode (10nA) \n• Differential inputs \n• Operates from VCC= 2.5V to 5.5V \n• 90dB PSRR @ 217Hz with grounded inputs \n• 6dB i;

丝印代码：95；1.2 W fully differential audio power amplifier with selectable standby and 6 dB fixed gain

Description The TS4995 is an audio power amplifier capable of delivering 1.2 W of continuous RMS output power into an 8 Ω load at 5 V. Thanks to its differential inputs, it exhibits outstanding noise immunity. Features ■ Differential inputs ■ 90 dB PSRR @ 217 Hz with grounded inputs ■ Operate

50mA to 600mA Programmable Current-Limit Switches

General Description The MAX4995A/MAX4995AF/MAX4995AL/MAX4995B/MAX4995C programmable current-limit switches feature internal current limiting to prevent damage to host devices due to faulty load conditions. These analog switches feature a low 130mΩ (typ) on-resistance and operate from a +1.7V to

50mA to 600mA Programmable Current-Limit Switches

General Description The MAX4995A/MAX4995AF/MAX4995AL/MAX4995B/MAX4995C programmable current-limit switches feature internal current limiting to prevent damage to host devices due to faulty load conditions. These analog switches feature a low 130mΩ (typ) on-resistance and operate from a +1.7V to

PANorama-IC PAN-IC

GENERAL DESCRIPTION The PAN-IC is an add-on IC to be used, for example, between analog-to-digital conversion and a serial (field) memory. The device performs the following tasks: • Linear horizontal sample rate conversion in both zoom and compress direction, with a sample rate conversion factor

BOOMER-R AUDIO POWER AMPLIFIER SERIES

文件：769.6 Kbytes Page：15 Pages