Low Drop Out Linear Voltage Regulator

5 V Fixed Output Voltage Description The TLE4291 is a monolithic integrated low-dropout voltage regulator in a PG-SSOP-14 EP exposed pad package, especially designed for automotive applications. An input voltage up to 42 V is regulated to an output voltage of 5.0 V. The component is able t

汽车级线性稳压器

An input voltage up to 42 V is regulated to an output voltage of 5.0 V. The component is able to drive loads up to 450 mA. It is short-circuit protected by the implemented current limitation and has an integrated over temperature shutdown. The integrated reset and watchdog function makes it suitable • Output Voltage 5 V ± 2%\n• Output Current up to 450 mA\n• Very low Current Consumption\n• Power-on and Under voltage Reset with Programmable Delay Time\n• Integrated Standard Watchdog\n• Reset Low Down to V Q; = 1 V\n• Very Low Dropout Voltage\n• Output Current Limitation\n• Reverse Polarity P;

I/O Expander Load Switches with Serial Control

General Description The AAT4290 and AAT4291 SmartSwitch products are members of AnalogicTech’s Application Specific Power MOSFET™ (ASPM™) product family. The AAT4290 and AAT4291 are five and three P-channel MOSFETs, respectively, configured for use as a microprocessor I/O expander. Having indepen

Ultra-Small, 1.8V, μPower, Rail-to-Rail I/O Op Amps

General Description The MAX4291/MAX4292/MAX4294 family of micropower operational amplifiers operates from a 1.8V to 5.5V single supply or ±0.9V to ±2.75V dual supplies and has Rail-to-Rail® input/output capabilities. These amplifiers provide a 500kHz gain-bandwidth product and 120dB open-loop vol

Ultra-Small, 1.8V, μPower, Rail-to-Rail I/O Op Amps

General Description The MAX4291/MAX4292/MAX4294 family of micropower operational amplifiers operates from a 1.8V to 5.5V single supply or ±0.9V to ±2.75V dual supplies and has Rail-to-Rail® input/output capabilities. These amplifiers provide a 500kHz gain-bandwidth product and 120dB open-loop vol

Ultra-Small, 1.8V, μPower, Rail-to-Rail I/O Op Amps

General Description The MAX4291/MAX4292/MAX4294 family of micropower operational amplifiers operates from a 1.8V to 5.5V single supply or ±0.9V to ±2.75V dual supplies and has Rail-to-Rail® input/output capabilities. These amplifiers provide a 500kHz gain-bandwidth product and 120dB open-loop vol

I/O Expander Load Switches with Serial Control

文件：246.46 Kbytes Page：12 Pages