Low Noise, High Performance Microphone Preamplifier IC

[THAT-Corporation] Description The THAT 1510 and 1512 are high performance audio preamplifiers suitable for microphone preamp and bus summing applications. The ICs are pin compatible with the Analog Devices SSM2017 in both the 8-pin DIP and 16-pin SOIC packages. FEATURES • Excellent noise per

Low-Noise, High Performance Audio Preamplifier IC

[THAT Corporation] Description The THAT 1510 and 1512 are high performance audio preamplifiers suitable for microphone preamp and bus summing applications. The ICs are available in a variety of packages and pin configurations, making them pin compatible with the Analog Devices SSM2019 and

THAT1510P08-U - 音频控制前置放大器, 低噪, ± 5V至 ± 20V, DIP, 8引脚, -40 °C

The THAT1510P08-U is a low-noise high performance Audio Pre-amplifier IC for microphone preamp and bus summing applications. The IC is pin compatible with the analogue devices SSM2019 and SSM2017 and the INA217 and INA163. Gain for both parts is adjustable via one external resistor, making it possib ·Industry standard pinout\n·Gain adjustable from 0 to >60dB with one external resistor;

THAT1510S08-U - 音频控制器, ± 5V 至 ± 20V, SOIC, 8 引脚, -40 °C

The THAT1510S08-U is a high performance Audio Pre-amplifier IC suitable for microphone preamp and bus summing applications. It improves on existing integrated microphone preamps by offering lower noise at low gains, better distortion characteristics, lower power consumption, higher slew rate and ban ·Excellent noise performance through entire gain range\n·Exceptionally low THD+N over full audio bandwidth\n·7mA Typical low power consumption\n·3MHz Typical at G=1000 wide bandwidth\n·28V/s at G=10 and CL=50pF High slew rate\n·±13V Typical on ±15V supplies wide output swing\n·Gain adjustable from 1;

THAT1510S14-U - 音频控制器, ± 5V 至 ± 20V, SOIC, 14 引脚, -40 °C

1.0 AMPERE SILICON MINIATURE SINGLE- PHASE BRIDGES(VOLTAGE - 50 to 1000 Volts CURRENT - 1.5 Amperes)

VOLTAGE 50 to 600 Volts CURRENT 1.5 Amperes FEATURES • Ratings to 1000V PRV • Surge overload rating: 50 Amperes peak • Ideal for printed circuit board • Reliable low cost construction utilizing molded plastic technique • Mounting position:Any

GLASS PASSIVATED JUNCTION PLASTIC RECTIFIER(VOLTAGE - 50 to 1000 Volts CURRENT - 1.5 Amperes)

VOLTAGE 50 to 1000 Volts CURRENT 1.5 Amperes FEATURES • Plastic package has Underwriters Laboratories Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound. • Exceeds environmental standards of MIL-S-19500/228 • Low leakage. • In compliance with EU RoHS 20

PLASTIC SILICON RECTIFIER(VOLTAGE 50 to 1000 Volts CURRENT - 1.5 Amperes)

PLASTIC SILICON RECTIFIER VOLTAGE 50 to 1000 Volts CURRENT 1.5 Amperes FEATURES • Plastic package has Underwriters Laboratories Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound. • Exceeds environmental standards of MIL-S-19500/228 • Low

3 GHz INPUT DIVIDE BY 4 PRESCALER IC FOR DBS TUNERS

The µPB1510GV is a 3.0 GHz input divide by 4 prescaler IC for DBS tuner applications. The µPB1510GV is suitable for use of frequency divider for PLL synthesizer block. The µPB1510GV is a shrink package version of the µPB585G so that this small package contributes to reduce the mounting space. T

3 GHz INPUT DIVIDE BY 4 PRESCALER IC FOR DBS TUNERS

The µPB1510GV is a 3.0 GHz input divide by 4 prescaler IC for DBS tuner applications. The µPB1510GV is suitable for use of frequency divider for PLL synthesizer block. The µPB1510GV is a shrink package version of the µPB585G so that this small package contributes to reduce the mounting space. T