ASK Transmitter - 433 MHz

The TH72012 ASK transmitter IC is designed for applications in the European 433 MHz industrial-scientific-medical (ISM) band, according to the EN 300 220 telecommunications standard. It can also be used in other countries with similar standards like FCC part 15.231.\nThe transmitter's carrier freque ·Fully integrated PLL-stabilized VCO\n·Frequency range from 380 to 450 MHz\n·Single-ended RF output\n·ASK achieved by on/off keying of internal power amplifier up to 40 kbit/s\n·Wide power supply range from 1.95 to 5.5 V\n·Operating temperature range -40 °C to +125 °C\n·Very low standby curr;

ASK Transmitter

文件：696.3 Kbytes Page：20 Pages

433MHz ASK Transmitter

文件：1.1193 Mbytes Page：21 Pages

433MHz ASK Transmitter

文件：517.58 Kbytes Page：20 Pages

ASK Transmitter

文件：696.3 Kbytes Page：20 Pages

433MHz ASK Transmitter

文件：1.1193 Mbytes Page：21 Pages

433MHz ASK Transmitter

文件：517.58 Kbytes Page：20 Pages

ASK Transmitter

文件：696.3 Kbytes Page：20 Pages

封装/外壳：8-SOIC（0.154"，3.90mm 宽） 包装：卷带（TR） 描述：RF XMITTER ISM 380-450MHZ 8SOIC RF/IF，射频/中频和 RFID 射频发射器

封装/外壳：8-SOIC（0.154"，3.90mm 宽） 包装：卷带（TR） 描述：RF XMITTER ASK 380-450MHZ 8SOIC RF/IF，射频/中频和 RFID 射频发射器

ASK Transmitter

文件：696.3 Kbytes Page：20 Pages

TUNING VARACTOR

[TEMEX] Description This series of silicon tuning varactors have an epitaxial mesa design with a high temperature passivation. This technology is used to produce abrupt tuning varactor in SOT23 package. This family is designed for a low cost medium to high volume market that may be supplied in t

TUNING VARACTOR

[TEMEX] Description This series of silicon tuning varactors have an epitaxial mesa design with a high temperature passivation. This technology is used to produce abrupt tuning varactor in SOT23 package. This family is designed for a low cost medium to high volume market that may be supplied in t

HUB CONTROLLER FOR UNIVERSAL SERIAL BUS

The µPD72012 is a dedicated LSI for a HUB connected to a universal serial bus (USB) system. It is an upgrade of NEC’s µPD72011. It complies with USB specification revision 1.1. By putting descriptors into ROM, information such as a user’s vendor ID can be implemented in the chip. FEATURES

HUB CONTROLLER FOR UNIVERSAL SERIAL BUS

The µPD72012 is a dedicated LSI for a HUB connected to a universal serial bus (USB) system. It is an upgrade of NEC’s µPD72011. It complies with USB specification revision 1.1. By putting descriptors into ROM, information such as a user’s vendor ID can be implemented in the chip. FEATURES