ISDN S-Bus Input/Output Transformer

TEW4923 is designed/approved for use as an input/output transformer in the ISDN S-Interface. Features • Certified to the safety requirements of : EN41003 and EN60959. BABT CR/T/0053. • Fully encapsulated in epoxy for mechanical protection and to insure the dielectric strength requirements.

ISDN S-Bus Input/Output Transformer

TEW4923 is designed/approved for use as an input/output transformer in the ISDN S-Interface. Features • Certified to the safety requirements of : EN41003 and EN60959. BABT CR/T/0053. • Fully encapsulated in epoxy for mechanical protection and to insure the dielectric strength requirements.

ISDN S-Bus Input/Output Transformer

TEW4923 is designed/approved for use as an input/output transformer in the ISDN S-Interface. Features • Certified to the safety requirements of : EN41003 and EN60959. BABT CR/T/0053. • Fully encapsulated in epoxy for mechanical protection and to insure the dielectric strength requirements.

ISDN S-Bus Input/Output Transformer

TEW4923 is designed/approved for use as an input/output transformer in the ISDN S-Interface. Features • Certified to the safety requirements of : EN41003 and EN60959. BABT CR/T/0053. • Fully encapsulated in epoxy for mechanical protection and to insure the dielectric strength requirements.

ISDN S-Bus Input/Output Transformer

TEW4923 is designed/approved for use as an input/output transformer in the ISDN S-Interface. Features • Certified to the safety requirements of : EN41003 and EN60959. BABT CR/T/0053. • Fully encapsulated in epoxy for mechanical protection and to insure the dielectric strength requirements.

TEMPERATURE COMPENSATED ZENER REFERENCE DIODES

• TEMPERATURE COMPENSATED ZENER REFERENCE DIODES • LEADLESS PACKAGE FOR SURFACE MOUNT • 19.2 VOLT NOMINAL ZENER VOLTAGE + 5 • LOW NOISE • DOUBLE PLUG CONSTRUCTION • METALLURGICALLY BONDED

TEMPERATURE COMPENSATED ZENER REFERENCE DIODES

• TEMPERATURE COMPENSATED ZENER REFERENCE DIODES • LEADLESS PACKAGE FOR SURFACE MOUNT • 19.2 VOLT NOMINAL ZENER VOLTAGE + 5 • LOW NOISE • DOUBLE PLUG CONSTRUCTION • METALLURGICALLY BONDED

Multi-Channel Digital Audio Decoders

Description The CS4923/4/5/6/7/8 is a family of multi-channel digital audio decoders, with the exception of the CS4929 as the only stereo digital audio decoder. The CS4923/4/5/6 are designed for Dolby Digital and MPEG-2 Stereo decoding. In addition the CS4925 adds MPEG-2 multi-channel ecoding c

WITH RESET AND INHIBIT 5V.1A VERY LOW DROP REGULATOR

DESCRIPTION The L4923is a high current monolithic voltage regulator with very low voltage drop (0.70 V max at 1 A, TJ = 25 °C). The device is internally protected against load dumps transient of + 60 V, input overvoltage, reverse polarity, overheating and output short circuit : thanks to these fe

Dynamic Differential Hall Effect Sensor IC

Dynamic Differential Hall Effect Sensor IC The differential Hall effect sensor TLE 4923 is compatible to the TLE 4921-3U, except for having a 2-wire interface. The TLE 4923 provides high sensitivity, a superior stability over temperature and symmetrical thresholds in order to achieve a stable dut