ISDN S-BUS Input/Output Transformer

The 4 wire interface between Subscriber Terminals and The Network Temination has been standardised by CCITT recommendation I.430. It uses a passive bus which provides separate receive and transmit loops operating at 192 Kbits/s. The TEW4610 has been approved for use with the INTEL S-bus interface

Double Ended Mold Type Infrared Emitting Diode

■ Features 1. Compact double ended mold package (Packaging area : 37 smaller than GL480) 2. Narrow beam angle (Half intensity angle : ± 13˚ ) (Radiant intensity : 3 times as large as GL460) 3. High output type (GL4610) 4. Taped model, 2,000 pieces/reel ■ Applications 1. Floppy disk dr

Double Ended Mold Type Phototransistors

Features 1. Compact double ended mold package (Packaging area : 37 smaller than PT480) 2. Narrow beam angle (Half intensity angle : ± 20˚ Light sensitivity : 3 times as large as PT460 series) 3. Darlington output type (PT4610), visible light cut-off type (PT4600F/4610F/4650F), VCR tape end dete

Bipolar Integrated Circuit with Photodetection Function

For infrared remote control systems Features Extension distance is 8 m or more External parts not required Adoption of visible light cutoff resin

Double Ended Mold Type Phototransistors

Features 1. Compact double ended mold package (Packaging area : 37 smaller than PT480) 2. Narrow beam angle (Half intensity angle : ± 20˚ Light sensitivity : 3 times as large as PT460 series) 3. Darlington output type (PT4610), visible light cut-off type (PT4600F/4610F/4650F), VCR tape end dete

0.400-INCH SEVEN SEGMENT DISPLAYS

文件：624.36 Kbytes Page：7 Pages