TONE CONTROL AND SURROUND DIGITALLY CONTROLLED AUDIO PROCESSOR WITH AGC

DESCRIPTION The TDA7443D is a volume tone (bass and treble) balance (Left/Right) processor for quality audio applications in Hi-Fi systems. Selectable input gain is provided. Control of all the functions is accomplished by serial bus. The AC signal setting is obtained by resistor networks and s

TONE CONTROL AND SURROUND DIGITALLY CONTROLLED AUDIO PROCESSOR WITH AGC

8.1G (up to HBR3) DisplayPort™ 4-lane Re-timer

Features  Built-in re-timers − Integrated re-timers (Link training-tunable PHY repeater) for DisplayPort up to HBR3 @ 8.1Gbps. Supports both transparent mode and non-transparent mode (transparent or LTTPR) − Loss compensation to recover up to 27dB  Integrated AUX pass-through − Integrated A

6G Active Re-driver with Linear Equalization for HDMI 2.0

Features • Built-in Re-driver with CTLE − Integrated Re-driver for HDMI2.0 up to 6Gbps − Supports DP++, HDMI Source applications − Loss compensation to recover up to -10dB channel loss @6Gbps • CTLE, Flat Gain and Swing configurations − Four-lane configurations set by pin strapping. − Indep

10G Active Redriver with Linear Equalization for USB3.2/DisplayPort™

Features • Built-in redrivers − Integrated re-driver for USB3.2 up to Gen 2 @ 10Gbps − Integrated re-drivers for DisplayPort up to UHBR10 @ 10Gbps. − Supports both host (source) and device (sink) applications in USB-C subsystems with DisplayPort Alternate Mode − Loss compensation to recover u

10G USB 3.2 Re-timer (1-Port)

Features * Built-in re-timer ㅡ Integrated re-timer for USB 3.2 1-port (Tx/Rx) up to 10Gbps ㅡ Supports both Separate Reference Clock Independent SSC (SRIS) and Bit-Level Re- * timer (BLR) Architectures of USB3.1 Specification (Appendix-E) ㅡ 1055 compensation to recover up to 23dB channel loss

FILTER Passive Audio bandpass Filter

文件：100.26 Kbytes Page：1 Pages