4 x 30W QUAD BRIDGE CAR RADIO AMPLIFIER

Description The TDA7385 is an AB class audio power amplifier, packaged in Flexiwatt 25 and designed for high end car radio applications. Based on a fully complementary PNP/NPN configuration, the TDA7385 allows a rail to rail output voltage swing with no need of bootstrap capacitors. The extreme

4 x 42 W quad bridge car radio amplifier

Features ■ High output power capability: – 4 x 42 W / 4  max. – 4 x 23 W / 4  @ 14.4 V, 1 kHz, 10 % ■ Clipping detector ■ Low distortion ■ Low output noise ■ Standby function ■ Mute function ■ Automute at min. supply voltage detection ■ Diagnostics facility for: – Clipping – Out

四路BTL输出功率放大器，支持待机输入、静音输入和片段检测

The TDA7385 is an AB class audio power amplifier, packaged in Flexiwatt 25 and designed for high end car radio applications.\n\n Based on a fully complementary PNP/NPN configuration, the TDA7385 allows a rail to rail output voltage swing with no need of bootstrap capacitors. The extremely reduced bo • High output power capability: \n •4 x 42 W / 4 Ω max. \n •4 x 23 W / 4 Ω @ 14.4 V, 1 kHz, 10 % \n• Clipping detector \n• Low distortion \n• Low output noise \n• Standby function \n• Mute function \n• Automute at min. supply voltage detection \n• Diagnostics facility for: \n •Clipping \n •Out t;

4 x 42 W quad bridge car radio amplifier

Features ■ High output power capability: – 4 x 42 W / 4  max. – 4 x 23 W / 4  @ 14.4 V, 1 kHz, 10 % ■ Clipping detector ■ Low distortion ■ Low output noise ■ Standby function ■ Mute function ■ Automute at min. supply voltage detection ■ Diagnostics facility for: – Clipping – Out

DTMF Receiver

Overview The LC7385, 7385M CMOS DTMF Receiver ICs integrate bandsplit filter and digital decoder functions for the 16 DTMF digits used in touch-tone telephone systems. Features • Single +5V power supply. • Decodes all 16 DTMF digits. • Built-in differential input amplifier.

DTMF Receiver

Overview The LC7385, 7385M CMOS DTMF Receiver ICs integrate bandsplit filter and digital decoder functions for the 16 DTMF digits used in touch-tone telephone systems. Features • Single +5V power supply. • Decodes all 16 DTMF digits. • Built-in differential input amplifier.

Frame Engine and Data Link Manager

DESCRIPTION The PM7385 FREEDM-84A672 Frame Engine and Datalink Manager device is a monolithic integrated circuit that implements HDLC processing for a maximum of 672 bi-directional channels. FEATURES • Single-chip multi-channel HDLC controller with a 50 MHz, 16 bit “Any-PHY” Packet Interface (A

Error correction and host interface IC for CD-ROM SEQUOIA

GENERAL DESCRIPTION The SAA7385 is a high integration ASIC that incorporates all of the digital electronics necessary to connect a CD decoder to a SCSI host. An 80C32 microcontroller and a 53CF94 SCSI controller are embedded in the ASIC. The following functions are supported: • Input clock dou

Error correction and host interface IC for CD-ROM SEQUOIA

GENERAL DESCRIPTION The SAA7385 is a high integration ASIC that incorporates all of the digital electronics necessary to connect a CD decoder to a SCSI host. An 80C32 microcontroller and a 53CF94 SCSI controller are embedded in the ASIC. The following functions are supported: • Input clock dou