30 W 30 W stereo amplifier with mute and standby

Description The TDA7265B is class-AB dual audio power amplifier assembled in the Multiwatt package, especially designed for high-quality sound Features ■ Wide-range supply voltage (up to ± 35 V ABS max.) ■ Split supply ■ High output power ■ 30 W + 30 W at THD=10, RL = 8 Ω, VS ±

30 W + 30 W立体声放大器，支持静音和待机

The TDA7265B is class-AB dual audio power amplifier assembled in the Multiwatt package, especially designed for high-quality sound\n\n applications such as home entertainment systems and stereo TV sets.\n\n The device is pin-to-pin compatible with the TDA7265, TDA7269A and TDA7292. • Wide-range supply voltage (up to ± 35 V ABS max.) \n• Split supply \n• High output power \n• 30 W + 30 W at THD=10%, RL= 8 Ω, VS± 23 V \n• 25 W + 25 W at THD=1%, RL= 8 Ω, VS± 23 V \n• No “pop” at turn-on/off \n• Mute (“pop-free”) \n• Standby feature (low IQ) \n• Short-circuit protection \n;

25 25W STEREO AMPLIFIER WITH MUTE & ST-BY

DESCRIPTION The TDA7265 is class AB dual Audio power amplifier assembled in the Multiwatt package, specially designed for high quality sound application as Hi-Fi music centers and stereo TV sets. ■ WIDE SUPPLY VOLTAGE RANGE (UP TO ±25V ABS MAX.) ■ SPLIT SUPPLY ■ HIGH OUTPUT POWER 25 + 25W @ TH

Single-Chip Black and White CCD Camera signal Processing IC

Overview The LA7265W is a single-chip IC that provides the signal processing required by black and white CCD cameras. This IC is optimal for surveillance cameras, door intercom cameras, and personal computer input cameras due to its ultraminiature package, low current drain, wide dynamic range, a

Single-Chip Black and White CCD Camera signal Processing IC

Overview The LA7265W is a single-chip IC that provides the signal processing required by black and white CCD cameras. This IC is optimal for surveillance cameras, door intercom cameras, and personal computer input cameras due to its ultraminiature package, low current drain, wide dynamic range, a

Received Frequency Display for Radio Receivers

Features • Displays received frequency of each band of FM, MW, LW (LED static display). • Counts local oscillation frequency and displays received frequency. • Number of display digits : FM-5 digits, MW-4 digits, LW-3 digits. •Covers intermediate frequencies shown below. FM

LOW-POWER, FULL-SPEED USB 8-BIT MCU WITH 32K FLASH, 5K RAM, FLASH CARD I/F, TIMER, PWM, ADC, I2C, SPI

INTRODUCTION The ST7265x MCU supports volume data exchange with a host (computer or kiosk) via a full speed USB interface. The MCU is capable of handling various transfer protocols, with a particular emphasis on mass storage applications. ■ Memories – Up to 32K of ROM or High Density Flash