接收器

The IC is a very low power consumption single chip FSK/ASK Superheterodyne Receiver (SHR) for the frequency band 400 to 440 MHz. The IC offers a high level of integration and needs only a few external components. The device contains a low noise amplifier (LNA), a double balanced mixer, a fully integ • Low supply current (Is = 5.7 mA typ. in FSK mode, Is = 5.6 mA typ. in ASK mode)\n • Supply voltage range 5V ±10%\n • Power down mode with very low supply current (50nA typ.)\n • FSK and ASK demodulation capability\n • Fully integrated VCO and PLL Synthesiser\n • ASK sensitivity better than -10;

ASK/FSK Single Conversion Receiver

文件：1.20371 Mbytes Page：49 Pages

封装/外壳：28-TSSOP（0.173"，4.40mm 宽） 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：RF RX ASK/FSK 400-440MHZ 28TSSOP RF/IF，射频/中频和 RFID 射频接收器

0 to 200 kPa (0 to 29 psi) 40 mV FULL SCALE SPAN (TYPICAL)

The new MPX7200 series pressure sensor incorporates all the innovative features of Motorola’s MPX2000 series family including the patented, single piezoresistive strain gauge (X–ducer) and on–chip temperature compensation and calibration. In addition, the MPX7200 series has a high input impedance

0 to 200 kPa (0 to 29 psi) 40 mV FULL SCALE SPAN (TYPICAL)

The new MPX7200 series pressure sensor incorporates all the innovative features of Motorola’s MPX2000 series family including the patented, single piezoresistive strain gauge (X–ducer) and on–chip temperature compensation and calibration. In addition, the MPX7200 series has a high input impedance

0 to 200 kPa (0 to 29 psi) 40 mV FULL SCALE SPAN (TYPICAL)

The new MPX7200 series pressure sensor incorporates all the innovative features of Motorola’s MPX2000 series family including the patented, single piezoresistive strain gauge (X–ducer) and on–chip temperature compensation and calibration. In addition, the MPX7200 series has a high input impedance

0 to 200 kPa (0 to 29 psi) 40 mV FULL SCALE SPAN (TYPICAL)

The new MPX7200 series pressure sensor incorporates all the innovative features of Motorola’s MPX2000 series family including the patented, single piezoresistive strain gauge (X–ducer) and on–chip temperature compensation and calibration. In addition, the MPX7200 series has a high input impedance

256 x 9, 512 x 9, 1K x 9 CMOS FIFO

Descriptions The MS7200L/7201AL/7202AL are dual-port static RAM based CMOS First-In/First-Out (FIFO) memories organized in nine-bit wide words. The devices are configured so that data is read out in the same sequential order that it was written in. Additional expansion logic is provided to allow