ASK/FSK Single Conversion Receiver

The IC is a very low power consumption single chip FSK/ASK Superheterodyne Receiver (SHR) for the frequency bands 810 to 870 MHz and 400 to 440 MHz. The IC offers a high level of integration and needs only a few external components. The device contains a low noise amplifier (LNA), a double balance

接收器

The IC is a very low power consumption single chip FSK/ASK Superheterodyne Receiver (SHR) for the frequency bands 810 to 870 MHz and 400 to 440 MHz. The IC< offers a high level of integration and needs only a few external components. The device< contains a low noise amplifier (LNA), a double balance • Low supply current (Is = 5.7/5.9 mA typ. in FSK mode, Is = 5.0/5.2 mA typ. in ASK mode for 434/868 MHz)\n • Supply voltage range 5V ±10%\n • Power down mode with very low supply current (50nA typ.)\n • FSK and ASK demodulation capability\n • Fully integrated VCO and PLL Synthesiser\n • ASK sen;

Material Content Data Sheet

文件：32.619 Kbytes Page：1 Pages

Material Content Data Sheet

文件：32.619 Kbytes Page：1 Pages

封装/外壳：28-TSSOP（0.173"，4.40mm 宽） 包装：托盘 描述：RF RX ASK/FSK 810-870MHZ 28TSSOP RF/IF，射频/中频和 RFID 射频接收器

2-Channel, 256-Position Digital Potentiometer

GENERAL DESCRIPTION The AD5207 provides dual channel, 256-position, digitally controlled variable resistor (VR) devices that perform the same electronic adjustment function as a potentiometer or variable resistor. Each channel of the AD5207 contains a fixed resistor with a wiper contact that ta

Increment/Decrement Digital Potentiometer

GENERAL DESCRIPTION The AD5220 provides a single channel, 128-position digitally controlled variable resistor (VR) device. This device performs the same electronic adjustment function as a potentiometer or variable resistor. These products were optimized for instrument and test equipment push-but

12MHz Rail-to-Rail Input-Output Op Amps

General Description The EL5420C and EL5220C are low power, high voltage, rail-to-rail input-output amplifiers. The EL5220C contains two amplifiers in one package, and the EL5420C contains four amplifiers. Operating on supplies ranging from 5V to 15V, while consuming only 500µA peramplifier, the

12MHz Rail-to-Rail Input-Output Op Amps

General Description The EL5420C and EL5220C are low power, high voltage, rail-to-rail input-output amplifiers. The EL5220C contains two amplifiers in one package, and the EL5420C contains four amplifiers. Operating on supplies ranging from 5V to 15V, while consuming only 500µA peramplifier, the

Silicon planar type

Silicon planar type For stabilization of power supply ■ Features • Mini power type package (2-pin) • Allowing automatic mounting with the emboss taping • Sharp rising performance