SNUBBERLESS TRIAC

Description Based on ST’s Snubberless technology providing high commutation performances, the T1620-600W/700W/800W and T1630-600W are especially recommended for use with inductive loads such as rice cookers. They comply with UL standards (ref. E81734). Features ■ IT(RMS)= 16 A ■ VDRM

SNUBBERLESS TRIAC

Description Based on ST’s Snubberless technology providing high commutation performances, the T1620-600W/700W/800W and T1630-600W are especially recommended for use with inductive loads such as rice cookers. They comply with UL standards (ref. E81734). Features ■ IT(RMS)= 16 A ■ VDRM

SNUBBERLESS TRIAC

Description Based on ST’s Snubberless technology providing high commutation performances, the T1620-600W/700W/800W and T1630-600W are especially recommended for use with inductive loads such as rice cookers. They comply with UL standards (ref. E81734). Features ■ IT(RMS)= 16 A ■ VDRM

Snubberless 16A Triacs

Description Based on ST’s Snubberless technology providing high commutation performances, the T1620-600W/700W/800W and T1630-600W are especially recommended for use with inductive loads such as rice cookers. They comply with UL standards (ref. E81734). Features ■ IT(RMS)= 16 A ■ VDRM

SNUBBERLESS TRIAC

Description Based on ST’s Snubberless technology providing high commutation performances, the T1620-600W/700W/800W and T1630-600W are especially recommended for use with inductive loads such as rice cookers. They comply with UL standards (ref. E81734). Features ■ IT(RMS)= 16 A ■ VDRM

采集型隔离模块

TxxxxP系列信号调理模块为前级电流/电压信号输入，后级电流/电压信号输出的模拟量信号隔离模块，也称为隔离变送器。产品内嵌一个高效微功率电源，可以在向内部信号处理电路供电的同时向前级传感器输出一路隔离电源。产品内部采用电磁隔离技术，具有输入/输出/电源/隔离电源两两隔离特点，完全可替代传统的线性光耦隔离方案，且产品相比光耦隔离方案具有更好的温漂特性、线性度和精度。广泛应用于PLC、DCS、MCU等信号隔离转换。 ·四端隔离(信号输入、信号输出、供电电源和电源输出相互隔离)\n·高精度等级(0.1% F.S.)\n·高线性度(0.1% F.S.)\n·隔离电压(2.5KVDC/60s)\n·极低温漂(50PPM/℃，-40~+85℃范围内)\n·工业级(工作温度范围: -40~+85℃)\n·高可靠性（MTBF >500,000 小时）;

SNUBBERLESS TRIAC

Description Based on ST’s Snubberless technology providing high commutation performances, the T1620-600W/700W/800W and T1630-600W are especially recommended for use with inductive loads such as rice cookers. They comply with UL standards (ref. E81734). Features ■ IT(RMS)= 16 A ■ VDRM

封装/外壳：ISOWATT220AB-3 包装：散装 描述：TRIAC ALTERNISTOR 600V ISOWATT 分立半导体产品 晶闸管 - TRIAC

16A SNUBBERLESS TRIAC

文件：67.2 Kbytes Page：5 Pages

TRIAC ALTERNISTOR 600V ISOWATT

16A SNUBBERLESS TRIAC

文件：67.2 Kbytes Page：5 Pages

Active Single channel Analog signal Isolation barrier

文件：68.98 Kbytes Page：2 Pages

ACTIVE SIGNAL AMPLIFIER

文件：130.06 Kbytes Page：2 Pages

Isolated Transmitter

文件：341.75 Kbytes Page：4 Pages

ACTIVE SIGNAL AMPLIFIER

文件：130.06 Kbytes Page：2 Pages

Isolated Transmitter

文件：341.75 Kbytes Page：4 Pages

Isolated Transmitter

文件：226 Kbytes Page：4 Pages

16A SNUBBERLESS TRIAC

文件：67.2 Kbytes Page：5 Pages

IF quadrature transceiver

DESCRIPTION The SA1630 is a 70–400 MHz I/Q transceiver for wireless LAN. The Receive Path contains a digitally gain controlled linear IF amplifier, a pair of quadrature down conversion mixers and a pair of baseband amplifiers. The transmit path contains a pair of quadrature up conversion mixers t

D2PAK SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER(VOLTAGE - 20 to 100 Volts CURRENT - 16.0 Amperes)

FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound. • Exceeds environmental standards of MILS-19500/228 • Low power loss, high efficiency. • Low forwrd voltge, high current capability • High surge

SCHOTTKY BARRIER RECTIFIERS(16A,30-45V)

SWITCHMODE POWER RECTIFIERS D PAK SURFACE MOUNT POWER PACKAGE The D PAK Power rectifier employs the Schottky Barrier principle with a Molybdenum barrier metal. These state-of-the-art devices have the following features: * Low Forward Voltage * Low Switching noise * High Surge Capacity * Guara