Features

■ General

– Inrush current active management by

power limitation

– Very low standby current

– 3.0 V CMOS compatible inputs

– Optimized electromagnetic emissions

– Very low electromagnetic susceptibility

– Compliance with European directive

2002/95/EC

– Very low current sense leakage

■ Diagnostic functions

– Proportional load current sense

– High current sense precision for wide

currents range

– Current sense disable

– Overload and short to ground (power

limitation) indication

– Thermal shutdown indication

■ Protections

– Undervoltage shutdown

– Overvoltage clamp

– Load current limitation

– Self limiting of fast thermal transients

– Protection against loss of ground and loss

of VCC

– Overtemperature shutdown with auto

restart (thermal shutdown)

– Reverse battery protected

Description

The VNQ5E080TD1-E is a quad channel

high-side driver manufactured using ST

proprietary VIPower® M0-5 technology. The

VNQ5E080TD1-E is designed to drive 12 V

automotive grounded loads, and to provide

protection and diagnostics. It also implements a

3 V and 5 V CMOS-compatible interface for use

with any microcontroller.

The device integrates advanced protective

functions such as load current limitation, inrush

and overload active management by power

limitation, overtemperature shut-off with autorestart

and overvoltage active clamp.

A dedicated analog current sense pin is

associated with every output channel providing

enhanced diagnostic functions including fast

detection of overload and short-circuit to ground

through power limitation indication and

overtemperature indication.

The current sensing and diagnostic feedback of

the whole device can be disabled by pulling the

CS_DIS pin high to share the external sense

resistor with similar devices.