Description

The STUSB03E is a single chip transceiver that complies with the physical layer specifications of the Universal Serial Bus (USB) v2.0 standard. It has an integrated 5V to 3.3V regulator which allows direct powering from the VBUS. The transceiver has an integrated voltage detector to detect the presence of the VBUS voltage and features an internal D+ pull-up resistor implemented in accordance with the 27 resistor ECN.

The STUSB03E also supports Sharing mode when VBUS is not present, which allows the D+/D–lines to be shared with other serial protocols.

It supports both full-speed (12Mbps) and low speed (1.5Mbps) operation. It is also designed to operate down to 1.6V so that it is compatible with lower system voltages of most portable systems, which include PDAs, MP3 Player and Cell phones.

General features

■ Compliant to USB V2.0 for full-speed (12Mb/s) and low-speed (1.5Mbps) operation

■ HBM = ±14kV on D+, D– lines; ±5kV on VBUS

■ ESD Compliant to IEC-61000-4.2 (level 3) on D+, D- lines

■ Separate I/O supply with operation down to 1.6V

■ Integrated 3.3V output LDO

■ Very low power consumption to meet USB ‘suspend’ current requirements

■ Small QFN16 lead free package 3x3 mm2

■ No power supply sequencing requirements

■ Software controlled re-enumeration

■ Integrated D+ pull-up resistor for FS operation